Shifter knob removal 8000 series?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199487
Printed Date: 11 Nov 2024 at 11:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Shifter knob removal 8000 series?
Posted By: gleaner1
Subject: Shifter knob removal 8000 series?
Date Posted: 26 Jan 2024 at 8:14am
Has anyone attempted removing with destroying them? I need to remove and they don't appear to be threaded on.
Thanks in advance.
-------------
ALLIS CHALMERS "The color is orange"
|
Replies:
Posted By: automaticdave
Date Posted: 26 Jan 2024 at 8:22am
|
Pull strait up, don't punch yourself in the jaw doing so !
|
Posted By: Kenny L.
Date Posted: 26 Jan 2024 at 8:33am
I take a pair of bigger vice grips and put on the shaft just tight enough to slide on the shaft and still be able to tap on the bottom of the knob with a hammer and it'll slide the knob off, there's a clip the holds the knob on the shaft.
|
Posted By: DrAllis
Date Posted: 26 Jan 2024 at 8:47am
|
Like maybe clamp tight a 1/4" nut in the vise-grips teeth and they will still easily slide up and down on the handle like a slide hammer ??
|
Posted By: Leon B MO
Date Posted: 26 Jan 2024 at 5:45pm
|
I've got a knob on an 8070 pd lever that I can't keep on! Tried several types of glue, nothing holds. Idea's? Leon B MO
-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
Posted By: DrAllis
Date Posted: 26 Jan 2024 at 5:58pm
|
New tolerance ring AND weather strip glue like 3M brand 8001.
|
Posted By: lentsch
Date Posted: 26 Jan 2024 at 8:04pm
I used a 2 part epoxy and an Oring under the ball to keep the glue contained. They aint coming off!
-------------
WD,D15,190XT,7000,8010x2,7060,8070
|
Posted By: Daehler
Date Posted: 29 Jan 2024 at 12:13pm
A rubber hammer should be able to knock it up and off. Thats what ive used. The ring that goes inside that holds it on is discontinued from Agco or was last time i was looking. The knob is still available, cant see why you cant get the ring too.
-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
Posted By: Mikez
Date Posted: 31 Jan 2024 at 8:23am
|
Couldn’t you thread it. Then the option of knobs to choose from is endless
|
|