Farm Equipment - Traction Boost gauge line question.

Print Page | Close Window

Traction Boost gauge line question.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199482
Printed Date: 24 Sep 2024 at 3:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Traction Boost gauge line question.

Posted By: rasman57
Subject: Traction Boost gauge line question.
Date Posted: 25 Jan 2024 at 9:51pm

My D14 loader tractor is getting some new gauges along with some other long awaited improvements. No need for the flooded and broken boost gauge so I plan on removing the thin line from the small hydraulic block behind the dash and putting in a plug if possible. Is the line fitting NPT or 5/16 SAE or something different? Anyone done this. Thanks.

Replies:

Posted By: jaybmiller
Date Posted: 26 Jan 2024 at 7:09am

Someone will cringe when reading this , but there's a BOLT in that block on my D-14. it's been there long before I bought it in 2000. I'd have to look(brr and wet here) but think maybe a 1/4-28 ( fine thread ).

I KNOW that line is STEEL, to handle the pressure,saw it in a box marked 'Troy parts' last year....

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water