7060 rod bearings
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199444
Printed Date: 02 Dec 2024 at 3:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 rod bearings
Posted By: JPG AUSTRALIA
Subject: 7060 rod bearings
Date Posted: 24 Jan 2024 at 7:25am
 Bearing change on 7060 approx 12000 hrs,alot better then i thought they would be. We have owned this one since new so first time the oil pan has been off. Bearing date 76. |
Replies:
Posted By: I M Fedup
Date Posted: 24 Jan 2024 at 8:59am
| That's excellent for 12000 hours. Obviously you didn't tear it down just to look at them. What's the "rest of the story?" |
Posted By: SteveM C/IL
Date Posted: 24 Jan 2024 at 11:26am
| At those hours it would seem that it didn't do alot of hard work. That's a 6000 hr looking bearing. |
Posted By: JPG AUSTRALIA
Date Posted: 24 Jan 2024 at 4:49pm
| Yes i did just drop the pan for this,thought they were overdue and worried about the crank.Not touching the liners or rings as it doesnt have blowby or use oil.The first 6000+hours of this were worked very hard.24.5 x32 duals and wieghts pulling 32 ft air drill. The last half of these hours is now on single rears just pulling a spreader and other light loads. |
Posted By: JPG AUSTRALIA
Date Posted: 24 Jan 2024 at 5:03pm
 
|