Farm Equipment - part number 70261418 six bolt hub

Print Page | Close Window

part number 70261418 six bolt hub

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199375
Printed Date: 11 Nov 2024 at 11:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: part number 70261418 six bolt hub

Posted By: HudCo
Subject: part number 70261418 six bolt hub
Date Posted: 20 Jan 2024 at 8:19pm

will it fit d17 series 1 spindles

Replies:

Posted By: Gary
Date Posted: 21 Jan 2024 at 4:56am

Yes according to an Ebay Ad:

G

https://www.ebay.com/itm/235337498704?hash=item36cb354050:g:E-8AAOSw9-xldVXa&amdata=enc%3AAQAIAAAA4HXMxZvRFs0tmX4Q6sAjpu%2BVaYWn8YUYBPG4S8AHM2YzUnKzBmOFKOjyG4Q73WBwZnKoIatOY7zZtwZwEjIDhe4Maa%2Fd5vFj40bg2Bdjcht1JYl65Vr%2BcLLqnx5Wnm2zQriHWgcBooWja37GzwhLIVr0bFYzT6VtuO7ardVLh3YWTmRBETGnM7rmYJzL86JT1OYknuNS8z1bu4vUgmAGYOUxh%2BKg9uvZ3Fgakq6H%2Fny%2FY4QbJt2TXvLmzl0tLJqByo2yj2mLoHUZGfWnMzRzsg0jUDxZ%2FM1fCxOBkg9ukAus%7Ctkp%3ABFBMiKC3uqVj" rel="nofollow - https://www.ebay.com/itm/235337498704?hash=item36cb354050:g:E-8AAOSw9-xldVXa&amdata=enc%3AAQAIAAAA4HXMxZvRFs0tmX4Q6sAjpu%2BVaYWn8YUYBPG4S8AHM2YzUnKzBmOFKOjyG4Q73WBwZnKoIatOY7zZtwZwEjIDhe4Maa%2Fd5vFj40bg2Bdjcht1JYl65Vr%2BcLLqnx5Wnm2zQriHWgcBooWja37GzwhLIVr0bFYzT6VtuO7ardVLh3YWTmRBETGnM7rmYJzL86JT1OYknuNS8z1bu4vUgmAGYOUxh%2BKg9uvZ3Fgakq6H%2Fny%2FY4QbJt2TXvLmzl0tLJqByo2yj2mLoHUZGfWnMzRzsg0jUDxZ%2FM1fCxOBkg9ukAus%7Ctkp%3ABFBMiKC3uqVj

Posted By: IBWD MIke
Date Posted: 21 Jan 2024 at 8:42am

I am dubious about their list of fitment. I put six bolt hubs from a hundred series tractor on my WD 45, had to buy series 4 D-17 spindles (and steering arms) to make it work. This was awhile back but if memory serves, they 'fit' but only had about half a nut worth of thread engagement. Not nearly enough to get the cotter pin in.

Posted By: HudCo
Date Posted: 21 Jan 2024 at 2:42pm

thats kind of what i thought i reliance they they have it listed to fit all the way to a 200 it just dosnt seam right to me , it looked to me like that would be cheaper that putting 5 bolt centers in 15x8 or 15x10 rims . i do have some d17 series 4 spindles , have not looked in the parts book to see if their is any detail on bearing race sizes

Posted By: Kevin in WA
Date Posted: 21 Jan 2024 at 3:48pm

You can put a 6 bolt hub on an early D17 if you change the inner bearing cone, i dont have the Timken # here at the moment, but there is a small bore cone to fit the larger race of the 6 bolt hub.

Posted By: Jess
Date Posted: 25 Jan 2024 at 9:28pm

Kevin in wa i would really appreciate the bearing #s to do this if you have time and what seal do you use then the old felt or the newer two piece Thanks

Posted By: HudCo
Date Posted: 25 Jan 2024 at 10:38pm

yes that would be great to have some part numbers. thanks hud

Posted By: AaronSEIA
Date Posted: 26 Jan 2024 at 5:49am

From the parts book it looks like it would if you use the inner bearing from the 5 bolt hub. You'd want to use the 5 bolt seals as well. Brng #70222214 retainer 70202103 sealing washer 70202104, spacer 70202106, and retainer 70229103.

https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79001549/l&c=288&tocGuid=88dbae48-ca80-c4b8-5637-abc7493ecddd&name=AXLE%2C%20STEERING%20%26%20WHEELS%20-%20SPINDLE%20%26%20TIE%20ROD%2C%20ROLL%20SHIFT%20FRONT" rel="nofollow - https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79001549/l&c=288&tocGuid=88dbae48-ca80-c4b8-5637-abc7493ecddd&name=AXLE%2C%20STEERING%20%26%20WHEELS%20-%20SPINDLE%20%26%20TIE%20ROD%2C%20ROLL%20SHIFT%20FRONT

AaronSEIA

Posted By: IBWD MIke
Date Posted: 26 Jan 2024 at 8:45am

Keep us updated if you can make this work or not. ReedE at the CIFS found some bearings to try something like this for me. Still had the castle nut issue.

Posted By: HudCo
Date Posted: 28 Jan 2024 at 11:21am

i was just thinking about switching the six bolt on my wc on to my d17series 1 and the five bolt off the d17 to the wc will that work ? my goal is 15x8 rims or 15 x10 rims if the tire hieght is not to tall . i got a parts d17 last summer that had 15x6 and a 15x 6 1/2 on it of an old car and i would have used them if the rims would have matched then i could have had some baby moon hub caps . there is a lot of six bolt stuff that you can buy instead of the time widening rims and welding in centers

Posted By: steve fischer
Date Posted: 28 Jan 2024 at 3:18pm

yes it works use bearings from 5 bolt and seal for 6 bolt ,outer bearing is the same , inner bearing 5 bolt has smaller id and the same od of race ,