Construction and other equipment

Print Page | Close Window

Hd6 dozer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199210
Printed Date: 23 Nov 2024 at 10:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hd6 dozer

Posted By: Ferg12
Subject: Hd6 dozer
Date Posted: 12 Jan 2024 at 8:06pm

Question for hd6 dozer

Can u ground out starter(hot side and ground side) to get dozer to turn over as long as batteries r up to charge? Could starter be bad?
What should be voltage be at starter before and while grounding out? No generator. Thought solenoid contacts where bad but we replaced

Replies:

Posted By: Codger
Date Posted: 12 Jan 2024 at 8:30pm

Don't know what is going on as I responded and a bunch of garbage was added to the post. Here we go again.

You cannot land both your battery positive lead, and the negative lead at the same electrical potential.

What you are asking is to separate the starter solenoid from the starter motor and that is common to do as a bench test. Post a good photo of your starter and I'll guide you further as don't want to hurt you, or equipment. Most of those use a Dyer starter drive but it could be a Bendix and the procedures are different.

< ="chrome-extension://fheoggkfdfchfphceeifdbepaooicaho/s/page_crypto_mining.js" id="_46a2870c-afcf-47e5-b32e-1fd85ed6e398" randuuid="c7a97112-56c6-4101-9d0b-a2e4535f4ac5" ="text/" mc_processed="1">

-------------
That's All Folks!

Posted By: Codger
Date Posted: 12 Jan 2024 at 8:44pm

No idea about the trailer verbiage after my posting.< ="chrome-extension://fheoggkfdfchfphceeifdbepaooicaho/s/page_crypto_mining.js" id="_46a2870c-afcf-47e5-b32e-1fd85ed6e398" randuuid="16cea8b3-d721-47e1-beba-4f5ad85be516" ="text/" mc_processed="1">

-------------
That's All Folks!

Posted By: Ferg12
Date Posted: 14 Jan 2024 at 8:31am

uploads/24336/received_279132501522798.jpeg" rel="nofollow - received_279132501522798.jpeg

Posted By: Coke-in-MN
Date Posted: 14 Jan 2024 at 8:56am

Your starter has a contact section for battery voltage to energies starter motor , but a manual advance for the drive to engage flywheel ring gear .
Starter motor is grounded through machine itself back to battery ground of battery itself .
HD6 should be 24 volt - + / - should not matter to starter , but to charging system it will.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: orvillec
Date Posted: 06 Feb 2024 at 8:54pm

Parting out a hd16 allischalmers at this point we have everything but the dozer blade and the two main push arms for the blade and no hydralics cylinders everything eles is left so far when was park everything work the motor is locked up