Farm Equipment - Sticking brale pedal

Print Page | Close Window

Sticking brale pedal - 6060

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199063
Printed Date: 24 Sep 2024 at 5:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Sticking brale pedal - 6060

Posted By: only AC orange
Subject: Sticking brale pedal - 6060
Date Posted: 05 Jan 2024 at 3:06pm

Inside (left) brake pedal sticks down on my 6060. Anyone have a cure for this problem?

Replies:

Posted By: Lynn Marshall
Date Posted: 05 Jan 2024 at 3:52pm

They get dry and sticky where they pivot in the plastic bushings. You can try oiling them, but usually just take them apart and clean them good. Couple of snap rings involved with taking them apart. Make sure to keep the splines indexed properly.

Posted By: Amos
Date Posted: 09 Jan 2024 at 5:24pm

Mine had this problem from new. Dealer took the master cylinder off and rebuilt it. Still would stick occasionally, so last winter i pulled the pedals off and found a tiny stone in the nylon bushing removed it and never have i had to lift that pedal up with my toe since...if only I had done that in 1985....