Farm Equipment - Sticking Clutch Pedal on a Allis Chalmers 8070

Print Page | Close Window

Sticking Clutch Pedal on a Allis Chalmers 8070

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199061
Printed Date: 24 Sep 2024 at 9:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Sticking Clutch Pedal on a Allis Chalmers 8070

Posted By: toasty_osty
Subject: Sticking Clutch Pedal on a Allis Chalmers 8070
Date Posted: 05 Jan 2024 at 9:35am

Hi, I own a 8070 that has recently been having problems with the clutch pedal sticking. I’m trying to figure if I can adjust I or if I need to replace anything. Thanks

Replies:

Posted By: 8070nc
Date Posted: 05 Jan 2024 at 2:01pm

Probably the cable
You could unhook it at each end alternately
to determine if its in the cab or cable or valve

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Lynn Marshall
Date Posted: 05 Jan 2024 at 3:45pm

If it's a power director tractor, it's probably the clutch cable.

Posted By: DrAllis
Date Posted: 05 Jan 2024 at 5:45pm

If the pedal doesn't come clear to the top by itself, it could also be the down-shift switch worn out or needing a shot oil oil on it.

Posted By: Gregor
Date Posted: 09 Jan 2024 at 9:36am

Replaced my 8070 Power shift clutch cable last year. Actually pretty easy job to do. I don't think it took me more than a half hour to change out. I did attach about 4 ft of weed eater string to old cable on the cab side. Pulled cable out from the valve side. Pulled in new cable with the string. Amazing how much easier the pedal moves now. I need to do my 8030 also. To troubleshoot, I unhooked on both ends and couldn't move the cable by hand or with a pliers.