3 point hitch ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198543
Printed Date: 24 Sep 2024 at 1:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3 point hitch ID
Posted By: twinson
Subject: 3 point hitch ID
Date Posted: 04 Dec 2023 at 8:07pm
|
Does any one know who made this 3 point hitch or it's model number? I have one on the WD45 and would like to find one for the D17.  |
Replies:
Posted By: dfwallis
Date Posted: 04 Dec 2023 at 8:36pm
| ooo, I like that one better. Wish I had one of those instead. I'm making one for my CA (pre snap coupler) out of a Cross WD45 kit. |
Posted By: AC WD45
Date Posted: 04 Dec 2023 at 9:20pm
|
That looks like a Saginaw 3 point hitch. I have one on my WD45. ------------- German Shepherd dad 1957 Allis Chalmers WD45 #WD234847 1951 Allis Chalmers WD #WD88193 |
Posted By: steve(ill)
Date Posted: 04 Dec 2023 at 9:41pm
|
YEP... father in law had one like that on a D17-3 40 years ago.. Dont think Saginaw is in business any more. ......... top link is separate part on most new 3 point assemblies.
------------- Like them all, but love the "B"s. |
Posted By: HudCo
Date Posted: 05 Dec 2023 at 11:05am
| how does that hitch fit on a wd45? i can see how it would fit a d17 |
Posted By: Travis2766
Date Posted: 05 Dec 2023 at 7:10pm
|
Saginaw three point, not in the 3 point business anymore but it think they still make equipment. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: JimD
Date Posted: 09 Dec 2023 at 8:08pm
|
Yep that's a saginaw. The sway control was a problem on them. The bent end at the lift arm didn't always line up and couldn't be used. Otherwise a really good design. ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: HudCo
Date Posted: 09 Dec 2023 at 9:20pm
| i like that setup better than all the ones that i have seen , allso like the farm star hk-305 a combo of both of them would be the utlimate of the allis three point converions |
Posted By: HudCo
Date Posted: 09 Dec 2023 at 9:23pm
| worksaver hk-305 |
Posted By: 200Tom1
Date Posted: 09 Dec 2023 at 10:36pm
| I had 1 of those on my Series 4 D17 when I bought it. Do yourself a huge favor and find a factory 1 off a Series 4 or a 170. They are far nicer than those. |
Posted By: HudCo
Date Posted: 09 Dec 2023 at 11:15pm
| all nice and well but about the same amount of fabricating to fit a wd45 |
Posted By: AC WD45
Date Posted: 10 Dec 2023 at 5:31pm
This is my Saginaw 3 point. This was built in the 1970s. It bolts to the drawbar bracket and uses the lift latches on the rocker arms. The top link bracket bolts to the main axle housing.      ------------- German Shepherd dad 1957 Allis Chalmers WD45 #WD234847 1951 Allis Chalmers WD #WD88193 |
Posted By: DrAllis
Date Posted: 10 Dec 2023 at 5:42pm
| For clarification, factory D-17 IV or 170-175-180-185 hitch ONLY FITS on a series 4 D-17 snap-coupler tractor, not any older D-17 models. The rear end and drawbar area are completely different from early models. |
Posted By: ZachD89
Date Posted: 06 Feb 2024 at 8:26pm
|
I have this exact hitch for sale. It's a Saginaw 3pt. Very heavy hitch ------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner |