WD45 Valve Lash
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198360
Printed Date: 14 Nov 2024 at 8:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 Valve Lash
Posted By: lbr
Subject: WD45 Valve Lash
Date Posted: 23 Nov 2023 at 6:30pm
|
Could someone tell me what the valve lash should be on a WD45 Thanks
|
Replies:
Posted By: SteveM C/IL
Date Posted: 23 Nov 2023 at 7:06pm
| I'm thinking it was 15 cold and leave alone. Doc may pop in with the #. Runs in my mind that it's 2 more than hot spec. |
Posted By: Ed (Ont)
Date Posted: 23 Nov 2023 at 7:22pm
Operators manual calls for .012 hot. So .014 or .015 cold should do it. Easier to set cold and at least they will all be set at same temp. 
|
Posted By: Ed (Ont)
Date Posted: 23 Nov 2023 at 7:37pm
| The service manual calls for .013 valve lash. Does not specify hot or cold. Strange that it is not the same. I set mine a few years ago but don't remember which number I used. |