Model C clutch return spring
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198224
Printed Date: 14 Nov 2024 at 8:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Model C clutch return spring
Posted By: BrianC
Subject: Model C clutch return spring
Date Posted: 14 Nov 2023 at 6:07pm
|
I am installing the return spring. Per picture below, the forward end is attached to cotter pin's head. Where does the other end go?  |
Replies:
Posted By: PaulB
Date Posted: 14 Nov 2023 at 6:30pm
|
There should be a hole between the pivot hole and the clutch rod hole for it to go in. They did use different springs for different years and it might just hook in the cotter pin for the pivot back at the peddle.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: BrianC
Date Posted: 19 Nov 2023 at 11:32am
|
I installed it per PaulB. Painted end with a dab of white, you can see it protruding from the hole.  |