pressue relief valve on WD
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19815
Printed Date: 08 Feb 2025 at 11:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: pressue relief valve on WD
Posted By: CWells
Subject: pressue relief valve on WD
Date Posted: 23 Oct 2010 at 12:14pm
|
Can anyone tell me where the pressure relief valve is located on a WD?
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 23 Oct 2010 at 12:40pm
Are you talking hydraulic, engine oil or what?
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: CWells
Date Posted: 23 Oct 2010 at 3:35pm
|
Engine oil pressure relief valve
|
Posted By: Don(MO)
Date Posted: 23 Oct 2010 at 4:35pm
Hi Curtis, The engine relief valve is on the right side of block just above the oil pan. It's under a big (takes a 1-1/8" wench) plug. Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: CTuckerNWIL
Date Posted: 23 Oct 2010 at 4:37pm
It is right in front of the dipstick hole. About a 15/16" hex with a spring and a ball inside. My WC had a couple washers stacked behind the spring but after replacing all the bearings including cam brgs, it has good pressure without the washers now.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Don(MO)
Date Posted: 23 Oct 2010 at 4:44pm
|
Dang Charlie, I'm getting forgetful in my old age. lol
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: CTuckerNWIL
Date Posted: 23 Oct 2010 at 5:04pm
Don, What do you mean? I had to go out and look at my tractor to remember and I might still have gotten it wrong. LOL I musta been typing when you were cause I refreshed the page and there were no replies so I started typing.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
|