Chute electrical motor 720 snowblower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198119
Printed Date: 28 Nov 2024 at 7:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Chute electrical motor 720 snowblower
Posted By: dertz19
Subject: Chute electrical motor 720 snowblower
Date Posted: 07 Nov 2023 at 5:32pm
| It looks like the electric motor that rotates the discharge chute on the blower for my 720 has gone out. Any recommendation on a replacement? I assumed I'd have to have it rebuilt but I came across an aftermarket made by Flip Manufacturing that looks like the same thing except for a slightly different electrical connection. |
Replies:
Posted By: orangeman
Date Posted: 07 Nov 2023 at 6:56pm
| There was a thread on Simpletractors.com that contained the information you are looking for, if my memory serves. ~ Orangeman |
Posted By: AcFordHawk
Date Posted: 07 Nov 2023 at 8:19pm
|
Window regulator motor from early 70's chevy car works. Does have a different two wire hook up and may have to run ground wire to frame. I changed the wire ends to the female spade terminals and worked well, didn't loosen with vibrations. Did it on the snow blower I had, IBWD Mike has it now. I got the wrong side and think just swapped the gear head from one to the other. The left one is the salvage yard item.    ------------- IB (restoring), MF GC1705, MF 2705E |
Posted By: IBWD MIke
Date Posted: 08 Nov 2023 at 9:07am
|
I can verify what the man did works just fine. |
Posted By: Steve in NJ
Date Posted: 29 Feb 2024 at 9:47am
|
I think it was a rear window motor from a 70's Jeep that was the perfect swap. Somethin' like that........  Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: macvette
Date Posted: 04 Mar 2024 at 9:57am
| I used a LH window motor out of a Buick Regal quite a few years ago. Only had to drill one new hole in the blower mounting for the motor. For me it was a very reasonable replacement option. |