WD-45 eccentric clamp blocks
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198006
Printed Date: 25 Sep 2024 at 7:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD-45 eccentric clamp blocks
Posted By: sparky
Subject: WD-45 eccentric clamp blocks
Date Posted: 31 Oct 2023 at 7:45pm
|
Picked up another WD-45 a couple months ago and started today to mount a better set of rear rims on it. Out of the 8 eccentrics it only had 2 clamp blocks per side. I need at least 4 more blocks. Anyone have any spares laying around? Thanks much. ------------- It's the color tractor my grandpa had! |
Replies:
Posted By: Ed (Ont)
Date Posted: 31 Oct 2023 at 8:18pm
| No sure if I understand correctly. Are you referring to the wheel stops and the long bolt that goes thru the rail on the rim. If so only two of those were used on one rail only. |
Posted By: Gary
Date Posted: 31 Oct 2023 at 8:55pm
|
I believe what he is referring to is what the Parts Catalog calls Eccentric Pin Block, located inside the Eccentric Body and up against the Eccentric Rim Retaining Pin. G |
Posted By: sparky
Date Posted: 31 Oct 2023 at 8:56pm
|
I’m referring to the clamp block that the cam screw tightens against the rails. It’s the block that has the half moon milled on one side.
------------- It's the color tractor my grandpa had! |
Posted By: sparky
Date Posted: 31 Oct 2023 at 9:06pm
|
Gary out typed me and he’s spot on what I need. Thanks ------------- It's the color tractor my grandpa had! |
Posted By: Ted in NE-OH
Date Posted: 31 Oct 2023 at 10:00pm
|
Steiner Tractor has them. ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: tom51
Date Posted: 31 Oct 2023 at 10:00pm
| Contact Lon Sager he has everything you need |
Posted By: IBWD MIke
Date Posted: 01 Nov 2023 at 8:22am
X-2!!
|
tom51 wrote:Posted By: sparky
Date Posted: 01 Nov 2023 at 2:32pm
|
How do I contact Lon? ------------- It's the color tractor my grandpa had! |
Posted By: Gary
Date Posted: 01 Nov 2023 at 6:41pm
|
Forum member Lon(MN) |
Posted By: Ed (Ont)
Date Posted: 01 Nov 2023 at 7:22pm
| Thanks for clarifying. Yes I see them in the owner's manual. in the parts section. |
Posted By: tom51
Date Posted: 01 Nov 2023 at 9:53pm
| Sparkey you can email Lon at lselkriver@gmail.com he has what you need |
Posted By: Lon(MN)
Date Posted: 02 Nov 2023 at 7:05am
|
I have those parts and received your private message. Send me an email so I can send a picture. lselkriver@gmail.com. I just cleaned up some nice ones yesterday. Thanks for the referrals. ------------- http://lonsallischalmers.com |