Question for the plow guys
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19787
Printed Date: 08 Feb 2025 at 12:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Question for the plow guys
Posted By: Darrell Roberts
Subject: Question for the plow guys
Date Posted: 22 Oct 2010 at 12:13pm
|
Have a set of 3 bottom 14 inch snap coupler plows that are going to need points soon. I've read on this topic before and I know that there are diffrent points depending on the molboard that is on the plow. I cleaned mine off a little looking for the number and can read a very faint decal on the back of one that appears to have the number 262-14 or 242-14 on it. Does that sound right and if so does anyone know where I might be able to get a set of points at? If all else fails I can always take one of the old points off and see if there's a number stamped on it. Going to a local plow day tomorrow with the D14 and plows, supposed to be nice weather. Thanks, Darrell
|
Replies:
Posted By: Gerald J.
Date Posted: 22 Oct 2010 at 1:04pm
My 1968 plow bottoms book has only 226 beginning with 2 and three digits. Has only 332, 362, and 372 ending in 2. There are 24, 25, and 26 bottoms.
Generally there are several shares, points, shears, or blades (called all these things on different bottoms, for the same part) for each size and number bottom. A few are shared between multiple bottoms (most often different bottom numbers but common shares for one piece and slatted moldboards). The many different shares have different lengths, different materials and different amounts of suck.
I don't have any connections to any sources of plow parts.
Gerald J.
|
Posted By: DennisA (IL)
Date Posted: 22 Oct 2010 at 1:24pm
Darrell, there should be a part number stamped on the back side of the bottom.
-------------
Thanks & God Bless
Dennis
|
Posted By: Darrell Roberts
Date Posted: 22 Oct 2010 at 2:10pm
|
OK, thanks for your help. I'll take a closer look and see if what I can find.
|
|