Ac 7080 t handle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197703
Printed Date: 24 Sep 2024 at 11:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ac 7080 t handle
Posted By: Kadyn
Subject: Ac 7080 t handle
Date Posted: 14 Oct 2023 at 1:18pm
| I am looking at buying my great grandpas old 7080 that hasn’t been touched in 15 years I got it to run and drive in forward but can’t get the t handle to spin to get it in reverse. Any help would be nice |
Replies:
Posted By: SteveM C/IL
Date Posted: 14 Oct 2023 at 1:41pm
| The twist is pushing/pulling a cable so you have to see why it's not moving. Probably the cable itself but you won't know till you get the tranny side disconnected. |
Posted By: SilverShoes
Date Posted: 14 Oct 2023 at 3:18pm
| Yup take your floor plate up and the side panel off the console and start following the push pull cable. 90% of the time it’s a tight cable. They shift easily if the cables are in going condition. They don’t last long enough though, especially if they can get moisture or dirt inside of them |
Posted By: Kadyn
Date Posted: 14 Oct 2023 at 4:22pm
| Not what I wanted to hear but I will try it. Thank you |
Posted By: HudCo
Date Posted: 14 Oct 2023 at 8:31pm
| thats alot cheaper than biulding a tranny |
Posted By: victoryallis
Date Posted: 14 Oct 2023 at 8:46pm
|
Don’t force it ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: bigal121892
Date Posted: 15 Oct 2023 at 10:19am
What did you want to hear? You have a tractor that is over 40 years old, has sat for 15 years, you are going to have to put some money into it if you want to use it. One of the first things you will want to do, is replace the front harmonic damper.
|
Kadyn wrote: