D 21
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197684
Printed Date: 24 Sep 2024 at 11:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 21
Posted By: Allis Guy 17
Subject: D 21
Date Posted: 13 Oct 2023 at 5:54am
Hey guys was hoping for a little help . Have a d21 and need the tube from hydraulic filter to rear end housing. Any help would be great thanks in advance 
|
Replies:
Posted By: DougG
Date Posted: 14 Oct 2023 at 2:48am
| Theres probably a few around - but- you may try to put a hydraulic hose in its place , pia. with fittings etc but would probably work |
Posted By: darrel in ND
Date Posted: 14 Oct 2023 at 7:41am
|
Try running that part number through an agco dealer. You might be surprised. Darrel |
Posted By: Allis Guy 17
Date Posted: 14 Oct 2023 at 7:54am
| Thanks guys plan is to use a hose . Tried running part number no longer available |
Posted By: SteveM C/IL
Date Posted: 14 Oct 2023 at 1:46pm
| NLA yes but did they do a national search for a NOS in somebody parts bin? |
Posted By: AC720Man
Date Posted: 14 Oct 2023 at 5:01pm
|
Steve that’s a great suggestion, Brenda at SLI has found several items for me that way. She searched for me, I didn’t even ask her to. Some dealers will go above and beyond to help locate parts. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: SteveM C/IL
Date Posted: 14 Oct 2023 at 9:15pm
| I'm in IL. My dealer found me the only part left in the country according to dealer info in Washington State. Called them and bought over phone including shipping. Even supplied phone #. |
Posted By: Mikez
Date Posted: 18 Oct 2023 at 6:59am
| That’s a new one. Buying allis chalmers parts from Nissan |
Posted By: im4racin
Date Posted: 18 Oct 2023 at 7:05am
| I’m throwing the BS flag. Think that’s a bot or scam post! |
Posted By: DSeries4
Date Posted: 18 Oct 2023 at 2:52pm
|
I tried searching everywhere for this line when I got my D21 a few years ago - no luck. Have not found a used one either. If I had one to use as a pattern, my local hydraulic shop could probably bend one up. Did that for some of the lines on my 175 back in 2015. Currently running a flexible line, but I cannot leave it on there when I restore the tractor. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: im4racin
Date Posted: 18 Oct 2023 at 6:25pm
| What ends are on the line? JIC? What is the number? 239579? Does anyone have one off to get good pictures and dimensions from? West Dakota utilities in Mandan nd should be able to build it if it has jic ends. |
Posted By: Mikez
Date Posted: 18 Oct 2023 at 9:06pm
| Is it just me or did that bs buying hyd line from Nissan post disappear |
Posted By: im4racin
Date Posted: 18 Oct 2023 at 9:12pm
| The report button works! |
Posted By: im4racin
Date Posted: 19 Oct 2023 at 6:39am
| Does that last post from alvina28 seem like a bot? |
Posted By: Mikez
Date Posted: 19 Oct 2023 at 6:44am
| I’d say so. I received one in pm over night |
Posted By: RedHeeler79
Date Posted: 19 Oct 2023 at 7:47pm
| In response to the original post, some hydraulic shops can make steel lines like that. I had a steel line reproduced for a D14 years ago at Clarkson Power Flow in Kansas City, worked perfectly and looked original. Mine had rusted through. If you have the original tube they could probably produce a copy. |
Posted By: Mikez
Date Posted: 19 Oct 2023 at 11:19pm
| Gentry welcome to the forum. Is D14 your only orange. |
Posted By: Mikez
Date Posted: 19 Oct 2023 at 11:21pm
| Wonder why this particular post is getting so many scammers. It’s not in classifieds and doesn’t say wtb in heading. Goodluck I ran the part number and don’t have anything |
Posted By: Allis Guy 17
Date Posted: 20 Oct 2023 at 5:50am
Got the tube off and it is a puzzle the one end is a jic fitting up by the filter housing . The other end that swivels but threads directly into the housing here are the pics any help getting an original or reproduced one would be great 
|
Posted By: Hurst
Date Posted: 24 Oct 2023 at 10:06am
|
Looks like a male pipe swivel. Pretty common fitting if it is. Notorious for leaking after a while though, as they just rely on an internal o-ring to seal. Hurst ------------- 1979 Allis Chalmers 7000 5800 Hours |