Print Page | Close Window

Member passing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197631
Printed Date: 04 Dec 2024 at 9:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Member passing
Posted By: MACK
Subject: Member passing
Date Posted: 09 Oct 2023 at 5:34pm
I know my dad (Mack) really enjoyed this forum - I wanted to let you all know that he passed away yesterday.   His visitation will be Friday 10 am with funeral to follow at 11 at Stith Funeral Home in Gallatin, MO.



Replies:
Posted By: DSeries4
Date Posted: 09 Oct 2023 at 5:41pm
Very sad to hear. He was a wealth of knowledge and very helpful to me and many others here. He will be missed. Sympathies to you and your family.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: steve(ill)
Date Posted: 09 Oct 2023 at 5:42pm
Your dad was here from the beginning.. He will be missed.. So sorry for your loss.

-------------
Like them all, but love the "B"s.


Posted By: sparky
Date Posted: 09 Oct 2023 at 5:44pm
Sad for your loss. A very knowledgeable person and will be missed.

-------------
It's the color tractor my grandpa had!


Posted By: AC720Man
Date Posted: 09 Oct 2023 at 5:51pm
Very sorry to hear this. He has helped so many of us on here. Prayers of comfort for you and your family.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: captaindana
Date Posted: 09 Oct 2023 at 5:59pm
So sorry to hear. Mack will surely be missed. Condolences from Upstate NY.

-------------
Blue Skies and Tail Winds
                          Dana


Posted By: 1955CA
Date Posted: 09 Oct 2023 at 6:02pm
My condolences to you and your family.


Posted By: DrAllis
Date Posted: 09 Oct 2023 at 6:13pm
Very sorry to hear this news. Your Dad and I had many talks over the years at tractor pulls we both attended. God bless.


Posted By: NEVER green
Date Posted: 09 Oct 2023 at 6:17pm

   Sorry for your loss, more knowledge gone.


-------------
2-8050 1-7080 6080 D-19 modelE & A 7040   R50       


Posted By: Jim NEIN
Date Posted: 09 Oct 2023 at 6:29pm
Sorry to hear that.


Posted By: JoeM(GA)
Date Posted: 09 Oct 2023 at 6:35pm
Praying for you and the whole family, Mack has helped a lot of us here, so sorry to hear this news

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB


Posted By: RedHeeler79
Date Posted: 09 Oct 2023 at 6:39pm
Very sorry for your family’s loss, and sad that this forum lost a knowledgeable and helpful member.


Posted By: dr p
Date Posted: 09 Oct 2023 at 6:53pm
Your dad took a lot of time in the last year to help me with my rotobaler. Never made me feel stupid. My condolences for you and your family


Posted By: AllisFreak MN
Date Posted: 09 Oct 2023 at 7:02pm
Very sorry for your loss.  He helped a lot of us with his knowledge.  God bless your family.

-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2


Posted By: SteveM C/IL
Date Posted: 09 Oct 2023 at 7:06pm
Sad news. He recently mentioned his health condition. Had no idea about that till then. Will be missed. My condolences.


Posted By: Tim NH
Date Posted: 09 Oct 2023 at 7:21pm
Sorry to hear of your loss. He will be missed on here. Thank you for posting his passing.


-------------
1950 WD 1959 D14 1955 WD45 1976 7000 B 207


Posted By: plummerscarin
Date Posted: 09 Oct 2023 at 7:28pm
My condolences to you and your family


Posted By: ACinSC
Date Posted: 09 Oct 2023 at 7:34pm
Sad news. Prayers from SC


Posted By: automaticdave
Date Posted: 09 Oct 2023 at 7:36pm
Sorry to hear Mack was a very knowledgeable and helpfull person.


Posted By: Alberta Phil
Date Posted: 09 Oct 2023 at 7:56pm
So sorry to hear this.  Your Dad was a big part of the Forum and always stepped up to share his knowledge with anyone having a problem with a piece of equipment.  He will be greatly missed by us all.
Prayers for your family from Alberta, Canada

Phil.


Posted By: Dirt Farmer
Date Posted: 09 Oct 2023 at 8:12pm
Sorry to hear, he will be missed, prayers from Illinois


Posted By: Red Bank
Date Posted: 09 Oct 2023 at 8:25pm
Very sorry to hear this, he was a wealth of knowledge with a willingness to help others and thank you for letting us know of his passing, prayers for you and your family during the coming days and weeks.


Posted By: randy
Date Posted: 09 Oct 2023 at 8:47pm
He helped me with my D17D, prayers from Illinois.
Will be missed by all of us


-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070


Posted By: Steve in NJ
Date Posted: 09 Oct 2023 at 8:57pm
Sorry for your loss! He was quite the regular here and a wealth of AC information. A shock that he's no longer with us. He will be missed.
Steve@B&B


-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife


Posted By: Tracy Martin TN
Date Posted: 09 Oct 2023 at 9:15pm
Prayers for you and the family! God Bless!

-------------
No greater gift than healthy grandkids!


Posted By: tbran
Date Posted: 09 Oct 2023 at 9:21pm
Heart is heavy , a great guy.  Lots of great conversations.  So few of old guys left....

-------------
When told "it's not the money,it's the principle", remember, it's always the money..


Posted By: Macon Rounds
Date Posted: 09 Oct 2023 at 9:40pm
His presence here will always be remembered.

He helped me out many times.
and will be greatly missed by all that knew him.

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate


Posted By: Ted J
Date Posted: 09 Oct 2023 at 9:43pm
Prayers for you and the family, Mack has helped so many of us on here.
Another wealth of knowledge gone from our Allis family.
My condolences, I'm so sorry to hear this.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: AC WD45
Date Posted: 09 Oct 2023 at 9:47pm
As someone who once frequented here, and recently rejoined, it is hard reading this. I had wondered how many of the "old guys" were still around and Mack was one I wondered about. The knowledge that has been shared here over the years is absolutely priceless, I can't thank Mack or any of the other guys enough for all the help and advice I received when I tore my WD45 down all those years ago. All I can do is hope they understood how much I appreciated it then.

-------------
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193


Posted By: shameless dude
Date Posted: 09 Oct 2023 at 9:52pm
sorry to hear of your Dad, I never got to meet him, but wished I could have. comfort prayers from our home to yours.


Posted By: allischalmerguy
Date Posted: 09 Oct 2023 at 9:59pm
So sorry to hear this. Mack was one who knew his stuff. He will be missed.
God bless and keep you and your family

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,


Posted By: Relayman
Date Posted: 09 Oct 2023 at 10:01pm
Our AC family has lost a "good one". They don't make many like Mack anymore. If only we had videos of all the little tricks he had up his sleeve on how to repair anything AC. Prayers for him and for his family.


Posted By: HudCo
Date Posted: 09 Oct 2023 at 10:26pm
knowlage and willingness to help will be missed by me 


Posted By: dp7000
Date Posted: 09 Oct 2023 at 10:33pm
Very sorry to hear. A very generous man. Helpful to many he didn’t even know. Mack will be missed by many. Condolences to you and your family.


Posted By: orangereborn
Date Posted: 10 Oct 2023 at 12:31am
Best to the family.  We were lucky to have him. I visited with him several times.  Was at his place to pick up items for myself or for his custoners.  I keep a "wisdom library" and his name shows up often...Dale


Posted By: JPG AUSTRALIA
Date Posted: 10 Oct 2023 at 3:30am
Sorry for your loss.I will miss him on the forum,he was a wealth of knowledge.


Posted By: WF owner
Date Posted: 10 Oct 2023 at 5:44am
My condolences to you and your family.

Mack was definitely one of the AC experts and always willing to help anyone that asked. 


Posted By: Stan R
Date Posted: 10 Oct 2023 at 5:58am
My condolences and to the family's loss. He will be missed on this forum.


Posted By: TOM (NE)
Date Posted: 10 Oct 2023 at 6:49am
Sorry for your loss, he will truly be missed by all who knew him. 


Posted By: IBWD MIke
Date Posted: 10 Oct 2023 at 6:51am
Very sorry to hear this, he was one of the greats.


Posted By: injpumpEd
Date Posted: 10 Oct 2023 at 7:37am
So sorry to hear this sad news! Mack is one of the "good ole guys" on this page, and his experience will be missed! Sending thoughts and prayers to the entire family from IL!

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: Mikez
Date Posted: 10 Oct 2023 at 8:04am
Sad to hear. Also sending condolences to you and your family.


Posted By: Lynn Marshall
Date Posted: 10 Oct 2023 at 8:05am
Sad news indeed. I met Mack once at the Greene county fair tractor pull in Jefferson, Iowa. He was busy and yet still had time for a brief chat. His experience will surely be missed on this site. Condolences to the family.


Posted By: Lonn
Date Posted: 10 Oct 2023 at 8:42am
Sorry for your loss. I talked to Mack on the phone a couple years ago. He gave me some advise on adjusting a governor for a ford engine in my Mustang skid loader. He will be missed. God Bless.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: mdm1
Date Posted: 10 Oct 2023 at 9:25am
Sorry to hear of your loss. Always enjoyed his response and expertise. Straight and unbiased. Appreciated that.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!


Posted By: Pfouts Family Farm
Date Posted: 10 Oct 2023 at 9:44am
So sorry to hear about this.  Mack was always a good source of information.  He would post often where there was something of value he could add, and I know that he helped many with problems they were having.  Though I never had direct contact with him, I learned a lot just reading what he had to say.  I always enjoyed reading his posts.  He will be missed around here!! and that is an understatement. Our thoughts and prayers are with his family.


Posted By: darrel in ND
Date Posted: 10 Oct 2023 at 11:19am
Oooof-dah, that's tough news to take. I visited with Mack on the phone on several occasions. Glad that he was generous enough to give me his phone number. He advised me well on more than one occasion. I guess that as I have done with others, his contact will stay in my phone forever, so when I am scrolling through my contacts, I'll be reminded of him. I wish that I could have met him in person. Prayers to his entire family.
Darrel


Posted By: DieselBumpkin
Date Posted: 10 Oct 2023 at 11:25am
Our condolences.


Posted By: Tbone95
Date Posted: 10 Oct 2023 at 11:31am
So sorry for the family loss. What an amazing smart helpful guy.


Posted By: exSW
Date Posted: 10 Oct 2023 at 12:56pm
My condolances.

-------------
Learning AC...slowly


Posted By: GeneD14
Date Posted: 10 Oct 2023 at 12:59pm
Sorry for your loss. Prayers to your family.


Posted By: Rick
Date Posted: 10 Oct 2023 at 1:23pm
So sorry for the family's loss...Prayers...


Posted By: Ray54
Date Posted: 10 Oct 2023 at 1:58pm
Condolences to your family. 


Posted By: DougG
Date Posted: 10 Oct 2023 at 6:54pm
Deepest sympathies to family and friends,,, he was very easy to talk with and helped me a few times- he sure tore up the track with his gasser 190 XT - and WD 45-- always kept the pullers on their toes,, sure will miss his advise on here,,


Posted By: Gary (sw Wis.)
Date Posted: 11 Oct 2023 at 7:52am
My condolences He was a wise man.

-------------
190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60


Posted By: Hurst
Date Posted: 11 Oct 2023 at 11:49am
Sorry to hear about your loss!  He had a wealth of Allis knowledge and was always there to answer a question.  Prayers and condolences to you and your family. 

Hurst


-------------
1979 Allis Chalmers 7000
5800 Hours


Posted By: orangeman
Date Posted: 11 Oct 2023 at 1:01pm
Mack:  Sad news for sure when a father passes on.   Hopes and prayers that you and your family may find some small measure of peace at this very difficult time.   Respectfully  ~ Orangeman


Posted By: brkfldj
Date Posted: 11 Oct 2023 at 5:00pm
Sorry for your loss. Seeing the signature “MACK” always served to validate what I was reading. I and we the Forum will surely miss him.


-------------
Democracy is two wolves and a lamb voting on what is for lunch. Liberty is a well-armed lamb contesting the vote. ——— Ben Franklin


Posted By: JC-WI
Date Posted: 11 Oct 2023 at 11:20pm
Just read of Mack's passing and leaves a lump in my gut tonight.
 He seemed to have valuable information for problems that cropped up, the kind of fellow that had wisdom... the kind of fellow we will miss because of his wit and wisdom is gone now.
 I know Mack sure helped me several times over the years... as others have too.
 Condolences to Mack's Family.



-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: Ted J
Date Posted: 12 Oct 2023 at 12:01am
Originally posted by darrel in ND darrel in ND wrote:

  I guess that as I have done with others, his contact will stay in my phone forever, so when I am scrolling through my contacts, I'll be reminded of him. I wish that I could have met him in person. Prayers to his entire family.
Darrel
Yes Darrel, that is true for me too.

How do we find his obituary at the Stith Funeral Home in Gallatin, MO.  I can't seem to find it.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: DougG
Date Posted: 12 Oct 2023 at 5:44am
Its out there- just Google his name - Eugene Mcneely-and its on the funeral homes site; please read the comments- they talk of his pliers clinking in his overall pocket in church- made me smile 


Posted By: CrestonM
Date Posted: 12 Oct 2023 at 12:28pm
Sorry for your loss. As others have said, a wealth of knowledge and always offered help without making people seem stupid. He will be missed.


Posted By: MACK
Date Posted: 12 Oct 2023 at 4:25pm
stithfamilyfunerals.com   


Posted By: JimWenigOH
Date Posted: 12 Oct 2023 at 8:21pm
So sorry to hear of the passing of your father, and one of the true "Go to guys" on this forum. I never met him in person, just was one who benefitted from his wealth of knowledge over the years. He will truly be missed by many. Prayers for you and your family during this time of loss.  Jim


Posted By: Pat the Plumber CIL
Date Posted: 12 Oct 2023 at 9:08pm
Been busy the last couple days, logged on tonight to see this . First ,I am so sorry to hear of your father's passing. Sending prayers of comfort to you , your family and friends. What a tribute, reading all these posts from fellow forum members. I could not say anything better about this man . I never met or ever talked with him but like others on here we all seem like some convoluted family. He will be missed. Rest in peace Mack ,thanks for all your help

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.


Posted By: Unit3
Date Posted: 12 Oct 2023 at 9:18pm
Thank you for sharing this with us. Hard times are made a little easier when we can talk about them with friends and family. Sorry for your family’s loss.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C


Posted By: wjohn
Date Posted: 12 Oct 2023 at 9:25pm
He was very helpful and hopefully his posts and this forum will live on for years. Sorry to hear about his passing.

-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45


Posted By: JC-WI
Date Posted: 13 Oct 2023 at 1:17am
Hot link...
http://www.stithfamilyfunerals.com/obituary/Eugene-McNeely" rel="nofollow - http://www.stithfamilyfunerals.com/obituary/Eugene-McNeely
 
Doug G. , the 'pliers clinking in his overall pocket' Reminded me of the days way back when when my father walked with his pliers and screwdriver in his plier pocket. Men like that were ready to fix almost anything on the spot.


-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: DonDittmar
Date Posted: 13 Oct 2023 at 5:51am
Well, its under the wrong circumstances, but its nice to face wit the name. Not at all what I had pictured in my head LOL

-------------
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"

1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start


Posted By: victoryallis
Date Posted: 13 Oct 2023 at 6:39am
He was a smart/experienced person he was one of those guys that I always hoped would reply when I had a question.  


-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760


Posted By: Dkienzle
Date Posted: 13 Oct 2023 at 7:34pm
My condolences to the family, MACK was a wealth of AC knowledge, I tended to read his replies just hoping to learn something, he will be greatly missed by a lot of people.


Posted By: DaveKamp
Date Posted: 14 Oct 2023 at 2:41pm
We are all honored by having him with us here as we did, and while he's passed on, his presence here is a gift to all who search for answers.  Thank you, Mack!!!


-------------
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.


Posted By: Sugarmaker
Date Posted: 14 Oct 2023 at 6:18pm
Our condolences to Mack's family. He provided lots of guidance as I worked on my old WD and WD45 projects over the years.
Regards,
Chris and Cheryl


-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.


Posted By: Herb(GA)
Date Posted: 14 Oct 2023 at 6:26pm
It is good to know that your Dad enjoyed life by helping others. Condolences to his family.  Herb(GA)


Posted By: Michael V (NM)
Date Posted: 25 Oct 2023 at 12:13pm
I'm just learning of this todayUnhappy,, condolences to MACK's family.
a wealth of AC knowledge that will be missed


Posted By: DIESEL
Date Posted: 04 Nov 2023 at 12:22am
Very sorry to hear this, I always appreciated his knowledge, he helped me many times on this forum.


Posted By: calico190xt68
Date Posted: 06 Nov 2023 at 8:29am
Very sorry to learn about his passing.  He helped me.  Over 7600 posts on this forum says it all.  His answers were short, sweet and usually correct.  He will be greatly missed by this forum.


-------------
80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, AC 4 row Planter, AC 77G Rake, Member Indiana A-C Partners, Member TAC


Posted By: scott
Date Posted: 06 Nov 2023 at 3:06pm
Mack helped me many times, he will be missed.


Posted By: Play Farmer
Date Posted: 04 Mar 2024 at 12:01pm
I haven't been on in a long time so I'm just reading this for the first time. 

I'm sorry isn't enough - Mack was a Legend, and I mean that with the utmost respect. This forum was a better place because of him. His knowledge was priceless - he will be missed. 


Posted By: garden_guy
Date Posted: 04 Mar 2024 at 1:47pm
Oh dang I missed out when this was originally posted 6 months ago. Sad to hear.


Posted By: AC 426 power
Date Posted: 04 Mar 2024 at 9:05pm
I missed this post as well back in October. So sorry to hear this as MACK was a huge help to the forum and the Allis community.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net