D10 and D12 Roll Call
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19759
Printed Date: 08 Feb 2025 at 11:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10 and D12 Roll Call
Posted By: wood
Subject: D10 and D12 Roll Call
Date Posted: 21 Oct 2010 at 6:40pm
| I was thinking that it would be nice to see how many D10 and D12 owners are on this forum. I have a 10 and 12 series three. They are four speeds. The 10 has front mount cultivator, and the 12 have a Allis rear mount cultivator. I have a four row no till Allis planter that I can make a two row out of for the 12 to pull. |
Replies:
Posted By: JoeO(CMO)
Date Posted: 21 Oct 2010 at 7:04pm
|
I also have a D10 III, a D12 III, both have range transmissions. I have a 1 row cultivator for the D10, have 2 - 2 bottom plows, 3 point, one is for sale(don't need). The D12 III will be for sale, is presently scattered in my basement and I haven't had time to put it together due to too many other priorities needing attention. ------------- |
Posted By: TerryMN
Date Posted: 21 Oct 2010 at 7:39pm
|
Some where around my place there are 2 D-12III range tranny both with front mount 2 row cultivators and the large tire option. A D-10 III with one row front mount cultivator. 2 D-10 III range tranny one with under the hood muffler. And another D-10 III four speed that complete but is more of a parts tractor for now. |
Posted By: MUM FARMER
Date Posted: 21 Oct 2010 at 7:39pm
| We have 3 D12 series 3 2 3pth 1 snapcoupler 1D12 series 2 1D10 series 3 1D10 series 2 all series 3s have dual range trans also have a rough D12 series 3 dual range in need of serious cosmetic and engine work |
Posted By: MBwcenll
Date Posted: 21 Oct 2010 at 7:42pm
| The owners registry would have most of this info. We have a 10 high crop and a 12 III. |
Posted By: Eldon (WA)
Date Posted: 21 Oct 2010 at 9:21pm
|
I have a D12 Series III with range transmission, factory 3pt and Allied hydraulic loader....just sits in the shed all year since I bought my skidloader. Sure wish it had power steering!
------------- ALLIS EXPRESS! This year: |
Posted By: Brian Ahart
Date Posted: 21 Oct 2010 at 9:23pm
|
1968 D12 III, SN 10010.
------------- A-C Weight ID reference and other goodies at http://www.brianahart.net" rel="nofollow - brianahart.net |
Posted By: Dale H. ECIL
Date Posted: 21 Oct 2010 at 9:59pm
|
I have a 1967 D10III, serial # 9909, dual tranny, front hyd. lift, 3 pt and front weight. A 1959 D12I with snap coupler, serial # 1823. ------------- Allis Chalmers Museum, Paris, Il.http:// www.allischalmersmuseum.com 217-275-3428 |
Posted By: Dave (NE)
Date Posted: 22 Oct 2010 at 12:10am
| I wish I had either/both a D10 and/or D12 III. Your lucky guys. |
Posted By: Bobby in King NC
Date Posted: 22 Oct 2010 at 5:39am
| I have 3 Series II D10s and 3 Series III D10s. All have factory 3 point. Two of the Series IIIs have range transmission. All are in excellent shape. |
Posted By: David(Stockbridge)MI
Date Posted: 22 Oct 2010 at 6:48am
|
Have both the D10 & D12 in series III and both have the range transmission. D12 restored last winter, D10 this winter. ------------- All "NEW" Web Site http://www.djstractorparts.com 2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler |
Posted By: Calvin Schmidt
Date Posted: 22 Oct 2010 at 7:13am
|
We have a D-10 II 3pt, D-10 I parts tractor, D-12 I SC beaufiful originial, and D-12 III range transmission 3pt. Also complete D series. ------------- Nothing is impossible if it is properly financed |
Posted By: Dale-OH
Date Posted: 22 Oct 2010 at 7:31am
| We have both D10 and D12 High Crops. The 10 does have mounted cultivators. |
Posted By: Dusty MI
Date Posted: 22 Oct 2010 at 7:40am
|
I have a D-10 Series III with the range transmission. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: darrel in ND
Date Posted: 22 Oct 2010 at 8:04am
| I still need both to make my D series collection complete, Darrel |
Posted By: Austin(WI)
Date Posted: 22 Oct 2010 at 9:59am
|
D10 Series II. Used to be a county tractor. Original paint was Yellow underneath...not the primer. ------------- "Better By Design" |
Posted By: daryl
Date Posted: 22 Oct 2010 at 10:07am
|
I have a D-12 SerIII with 4 speed and factory 3ph...rare.. lol, good tractor just no ps and either too fast or to slow for most work. |
Posted By: Richardmo
Date Posted: 22 Oct 2010 at 10:56am
| I have 2 D 10 high crops and D 10 series 3 with range transmission. |
Posted By: Dave Richards (WV)
Date Posted: 22 Oct 2010 at 11:29am
| Two D-12IIs Both with range trans. Bought the second one for parts, but figure it is too good to part out. Now I need MORE parts. |
Posted By: Darrell Roberts
Date Posted: 22 Oct 2010 at 12:51pm
| Have a 1962 D 10 here. |
Posted By: Larry Miller
Date Posted: 22 Oct 2010 at 12:56pm
|
OK - I need the address of all you guys with the range transmission. With that many out there - some body won't miss one of them. Or if you want to sell one - let me know. Don't make me do what I am thinking. LOL ------------- I used to be young and stupid, now I am not young anymore. |
Posted By: tomwestky
Date Posted: 22 Oct 2010 at 1:27pm
| Have a D10 here in W. Ky. Main duty is to power a Woods finish mower and the grain auger at harvest time. Pulls the wagon for hay rides and gives grandchildren a rush with Orange Power. They are too small to drive the D21. |
Posted By: RMD
Date Posted: 22 Oct 2010 at 1:35pm
| I have two D-12s. A Series II with a L-99 loader and a Series I with power steering. My intention is to move the loader to the Seeries I with power steering. Both are snap coupler and I have a No. 7 mower and a snap-coupler rear-carrier. |
Posted By: snowman(MI)
Date Posted: 22 Oct 2010 at 8:26pm
Just had a picture of our D-10 III with front weight, grille guard, front rock shaft, tach, rear wheel weights and new rubber this past spring. Also have a #82 and #72 three point plows and a three point Allis Oxnard 6' back blade.
|
Posted By: irlbeck A-C'S
Date Posted: 22 Oct 2010 at 8:31pm
|
D12, D12 series2, D12 Hi-crop |
Posted By: acdeerboy123
Date Posted: 22 Oct 2010 at 8:39pm
| looking for a three point plow for my d 12 searial no 9037, need light brackets on the fenders, have lights will buy complete units if the only that i can get them. email with any imfo. |