WD part tractor - Buy or Pass?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197504
Printed Date: 11 Nov 2024 at 11:08pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD part tractor - Buy or Pass?
Posted By: OrangePowerGA
Subject: WD part tractor - Buy or Pass?
Date Posted: 03 Oct 2023 at 11:59am
Greetings everyone; this is my first post after about 8 years off the forum!
I'm looking at buying a parts tractor to have for another WD I'm working on. It's located about an hour away and I only have photos that were texted to me to go by.
The WD I already have is 100% complete with nice sheet metal, just need to get it going again mechanically after 20 years of not running.
The asking price on the parts tractor is $600. I would have to pay to have it hauled approximately 50 miles. Should I buy it just to have if I ever need something or pass on it?
------------- AC - WD JD - 650
|
Replies:
Posted By: SteveM C/IL
Date Posted: 03 Oct 2023 at 12:45pm
What could you need that you couldn't buy from a vendor for a lot less? That is worth scrap price at best and I'm sure that's under $600.
|
Posted By: OrangePowerGA
Date Posted: 03 Oct 2023 at 1:04pm
SteveM C/IL wrote:
What could you need that you couldn't buy from a vendor for a lot less? That is worth scrap price at best and I'm sure that's under $600. |
Honestly, probably not much of anything and saying that could be a stretch. I had hopes that maybe it had a 3 point conversion, but it doesn't. The sheet metal is rough and there looks to already be parts missing.
------------- AC - WD JD - 650
|
Posted By: DSeries4
Date Posted: 03 Oct 2023 at 2:26pm
Depends what you need for your tractor. Doesn't look like this parts tractor has much to offer.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: DrAllis
Date Posted: 03 Oct 2023 at 2:53pm
I'm not sure I'd take it if it was delivered to me for free. What a dog !!
|
Posted By: DMac
Date Posted: 03 Oct 2023 at 8:30pm
you always hate to see one head to the scrap yard but i don’t see $600 of value there
|
Posted By: Alberta Phil
Date Posted: 03 Oct 2023 at 8:34pm
I've had parts tractor WD's given to me that were much better shape than that poor 'ol dog!
|
Posted By: im4racin
Date Posted: 03 Oct 2023 at 9:21pm
I have multiple running tractors I would sell for less!
|
Posted By: jvin248
Date Posted: 04 Oct 2023 at 12:16am
.
It would be worth that if you needed several parts. Bolster/block/transmission/etc. But if you don't see needing those parts then not yet.
A carb might be $300? But that's missing. A distributor/magneto might be $300 but that's missing too.
Engine free or stuck?
However, get another one or two parts tractors and you start to have parts to make another running tractor.
Maybe offer half to get all the parts you can strip without hauling on a trailer.
.
|
Posted By: Dakota Dave
Date Posted: 04 Oct 2023 at 5:30am
I see a large pile of money in your future. When I’ve bought a parts tractor I didn’t need any parts it had. So I ended up rebuilding the parts tractor. This more than doubled the cost that I had into the original tractor. Eventually I wound up with a matching pair of tractors both rebuilt.
|
Posted By: Fred in Pa
Date Posted: 04 Oct 2023 at 6:58am
The AC world will not run out WD Parts if this one goes to scrape .
------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED.
|
Posted By: Sinlens
Date Posted: 29 Jan 2024 at 10:02am
600 for this sounds doubtful, but if there are parts that are needed, I would pay that amount after looking for the best options using http://priceva.com/amazon-price-tracking" rel="nofollow -
|
Posted By: PaulB
Date Posted: 29 Jan 2024 at 1:29pm
DrAllis wrote:
I'm not sure I'd take it if it was delivered to me for free. What a dog !! |
X2: I'm trying to clear out unneeded junk around here, not drag more in.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY
|
Posted By: jvin248
Date Posted: 29 Jan 2024 at 8:50pm
Dakota Dave wrote:
I see a large pile of money in your future. When I’ve bought a parts tractor I didn’t need any parts it had. So I ended up rebuilding the parts tractor. This more than doubled the cost that I had into the original tractor. Eventually I wound up with a matching pair of tractors both rebuilt. |
I am right here, but on Fergusons (have the WD WF running). Heirloom TO35 needed repairs and parts, trans rebuild. Found a guy selling a runner, parts tractor, and a motor. I got the heirloom running with new parts, got the parts tractor running, and selling the olbought runner (it needed a new gov'nor though). I kind of like the parts tractor.
Look deeper than the sheet metal and paint. However, the carb and mag missing is half the value there.
.
|
Posted By: Steve in NJ
Date Posted: 29 Jan 2024 at 9:39pm
Wow! That poor old bugger seen better days. Not knowing what you need for parts, but I would think the drivetrain is in rough shape as well looking at the rest of it. Do you know if the motor at least turns over? I don't know, about that ole' girl. There were a few WD's on here not to long ago that were in much better shape for parts Tractors, but I understand it's not that far from you to get it home. Your call there..... Steve@B&B
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: HudCo
Date Posted: 29 Jan 2024 at 10:52pm
its allready missing the things you will need
|
Posted By: Ted J
Date Posted: 30 Jan 2024 at 1:45am
The hitch, the seat and maybe the front rims. I am always against scrapping em cause they don't make em anymore, but the above are all the only things that look to be any good. I would ONLY give what ever scrap is selling for.
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|