Help identify mounted coil tine harrow on FC
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197414
Printed Date: 25 Sep 2024 at 3:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help identify mounted coil tine harrow on FC
Posted By: Lonn
Subject: Help identify mounted coil tine harrow on FC
Date Posted: 27 Sep 2023 at 8:38pm
It's on my newly acquired 1400 field cultivator (Chiselvator) and need a few parts for the rear harrow. I can't ID it so I was hoping for some help. Thanks   ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Replies:
Posted By: Lonn
Date Posted: 27 Sep 2023 at 8:40pm
|
I need a hold down spring, brackets and a couple bars that the tines bolt to. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 05 Oct 2023 at 9:49am
|
Try again. I hope someone can help. Mainly I need a spring and the plugs on each end of the spring. Thanks ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Ray54
Date Posted: 05 Oct 2023 at 10:25am
I found without the down pressure springs I like my harrow much better. Trash flowed thru my cultivator only to plug the harrow. Then everything was a mess. But it is the off brand the local AC dealer promoted much more than the AC brand of tillage tools.Have you tried looking at McMaster-Carr and find a spring by dimension. But that would still leave you in need of plug.
|
Posted By: steelwheelAcjim
Date Posted: 05 Oct 2023 at 7:24pm
|
Remlinger Manufacturing. Kalida, Ohio. ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Posted By: Lonn
Date Posted: 10 Oct 2023 at 9:56am
|
Thanks guys I will take a look ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |