Farm Equipment - CA Hydraulic Pump Capacity Question

Print Page | Close Window

CA Hydraulic Pump Capacity Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197362
Printed Date: 25 Sep 2024 at 5:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Hydraulic Pump Capacity Question

Posted By: dfwallis
Subject: CA Hydraulic Pump Capacity Question
Date Posted: 25 Sep 2023 at 9:29am

The CA hydraulic pump appears to have two separate 3/8 inch output ports. I assume that one of the ports has an additional "delay" circuit for when the left cylinder is applied to for example the front cultivator while the right operates the rear cultivator. I wonder whether the GPM throughput might be increased slightly by combining those two ports externally into a 1/2 inch line (thinking that flow capacity might be reduced slightly by the 3/8 inch line).

Replies:

Posted By: DrAllis
Date Posted: 25 Sep 2023 at 10:16am

Nope. It's only a 3 to maybe almost 4 GPM pump on a good day.