Farm Equipment - 180 hydraulic leak

Print Page | Close Window

180 hydraulic leak

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197229
Printed Date: 25 Sep 2024 at 7:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 hydraulic leak

Posted By: ClayP
Subject: 180 hydraulic leak
Date Posted: 17 Sep 2023 at 8:00am

Looking for advice on repairing my a/c 180 that is leaking hydraulic reservoir into transmission reservoir!

Replies:

Posted By: DSeries4
Date Posted: 17 Sep 2023 at 9:15am

Split the tractor and replace the oil seals on the transmission input shaft and PTO shaft.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: ClayP
Date Posted: 17 Sep 2023 at 11:49am

Thanks

Posted By: ClayP
Date Posted: 17 Sep 2023 at 6:16pm

DSeries4 would you think I could finish up my fall ground before splitting the tractor. It seems to have a little more transmission fluid than it should have and the hydraulic reservoir is just off the dip stick. Is there anyway to equalize the oil by adding more to the hydraulic reservoir? Thanks in advance!

Posted By: MACK
Date Posted: 17 Sep 2023 at 7:50pm

Run it in low side of PD should help. Put new piston ring seals and PD housing that ring run in when replacing seals. MACK

Posted By: ClayP
Date Posted: 17 Sep 2023 at 8:46pm

I'll give that a try Mack! Thanks!