Farm Equipment - D-19 starter button

Print Page | Close Window

D-19 starter button

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197213
Printed Date: 25 Sep 2024 at 7:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-19 starter button

Posted By: rickinTN
Subject: D-19 starter button
Date Posted: 16 Sep 2023 at 8:45am

Hello all!
My starter button on my D-19 is frozen. I've been starting it by crossing the terminals on the back. Looking at Steiner Tractor they show a starter-headlight button but it doesn't look like mine. I have two flat terminals coming out of the back of mine. Do I have a starter/headlight switch? Could someone steer me toward the correct part number?

Thanks for your help!
Rick

Replies:

Posted By: Alberta Phil
Date Posted: 16 Sep 2023 at 9:43am

Maybe try your Agco dealer, if one near you?

Posted By: DSeries4
Date Posted: 16 Sep 2023 at 9:46am

ABC233. I don't know where you are looking, but my catalog does not show a headlight/starter switch

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: steve(ill)
Date Posted: 16 Sep 2023 at 9:47am

if you have only two terminals or screws that is a simple ON CONTACT push button switch.. There are dozens of options.. Most have two screw terminals and not spades on the back. you can get one at Auto Zone or NAPA or anywhere on line... PUSH and HOLD the button and you get contact between the two terminals, just like your jumper wire..

This is called a MOMENTARY switch.. Not and ON- OFF... Only contact while you HOLD the button down.

-------------
Like them all, but love the "B"s.

Posted By: Jim.ME
Date Posted: 16 Sep 2023 at 9:55am

It should be just a two-wire push button starter switch. Some did have blades for spade terminals held on with the screws where you could connect ring terminals. Your local parts store should have a starter pushbutton switch. The parts books shows 70253322 as the part number.