D14 oil pan
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197086
Printed Date: 25 Sep 2024 at 7:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 oil pan
Posted By: Mikey Joe
Subject: D14 oil pan
Date Posted: 08 Sep 2023 at 9:49am
|
I have a CA with a cast iron oil pan. Will a D 14 steel oil pan fit and work properly? This tractor has a cast iron valve cover also. Was this normal?
|
Replies:
Posted By: allisorange
Date Posted: 08 Sep 2023 at 4:40pm
|
Sounds like you have an engine from an older tractor in your CA. J Carlson
|
Posted By: DiyDave
Date Posted: 08 Sep 2023 at 5:41pm
Wartime AC engine, VC and OP were made of cast pot metal, as the steel was unavailable due to wartime shortages. Pretty sure the D-14 pan won't fit, but b, c, ca pans will... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: PaulB
Date Posted: 08 Sep 2023 at 7:14pm
|
B, C, CA, RC, D10/12/14/15 all oil pans are interchangeable. As for valve covers The B, C CA & RC will interchange. Only some have 2 bolt holes and others have 4. Use the correct hardware for the number of holes you have. Those that don't know should keep mum. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: steve(ill)
Date Posted: 08 Sep 2023 at 8:55pm
|
YEP... You valve cover and pan came off a B or C engine from the early 1940s... Or maybe the entire engine... You could tell from the serial number. ------------- Like them all, but love the "B"s. |