UC rear hub lugnut?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196952
Printed Date: 12 Nov 2024 at 9:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: UC rear hub lugnut?
Posted By: Leon B MO
Subject: UC rear hub lugnut?
Date Posted: 31 Aug 2023 at 3:46pm
I had time today to get the 37 UC out for its annual run about. Noticed one of the nuts that holds the rear rim on is missing. Is that a standard size nut with standard threads or is that something special I need to find on this site?
Thanks
Leon B Mo
-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
Replies:
Posted By: WF owner
Date Posted: 01 Sep 2023 at 9:32am
|
If I remember correctly, one of what appeared to be a wheel stud, was actually an alignment dowel that was not threaded. It always appeared that one bolt was missing a nut.
|
Posted By: CAL(KS)
Date Posted: 01 Sep 2023 at 11:41am
|
yes one is just a dowel but IIRC the nut is larger than a standard nut for the bolt size
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Leon B MO
Date Posted: 01 Sep 2023 at 3:27pm
That's kind of what I figured. I refuse to put two different sizes on the same wheel, drives me nuts when somebody else does that then I have to go looking for another socket. So does anyone have the nut for a U rear wheel stud?
If not I'll just go by 10 nuts so that they're all the same for both sides. Thanks again.
Leon B
-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|