Farm Equipment - 7000/8000 series pto seal

Print Page | Close Window

7000/8000 series pto seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196770
Printed Date: 25 Sep 2024 at 1:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000/8000 series pto seal

Posted By: gleaner1
Subject: 7000/8000 series pto seal
Date Posted: 21 Aug 2023 at 7:00am

Turns out both my 7030 and 8050 the pto output shaft seals are leaking.
As I’ve never done this repair before im assuming one has to drop that pan and get up inside to remove some snap rings to get it out?
Thanks ahead for any tips.

-------------
ALLIS CHALMERS "The color is orange"

Replies:

Posted By: 8070nc
Date Posted: 21 Aug 2023 at 7:47am

I did it 35 years ago on a 7045. We left a pto shaft too long on a new rotary cutter and it put pressure against the pto an took the seal out. My point is I dont remember enough to help you the fact that I did it at a tender young age without a service manua I know you will get along fine

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: AC7060IL
Date Posted: 21 Aug 2023 at 9:53am

Here’s a previous posting about it. https://www.allischalmers.com/forum/7020-pto-leaking_topic173838.html" rel="nofollow - https://www.allischalmers.com/forum/7020-pto-leaking_topic173838.html

Posted By: bigal121892
Date Posted: 21 Aug 2023 at 8:31pm

Be sure and drop the oil, the cover underneath, the night before, and let it drip overnight.