Farm Equipment - 325-12 plow share? Model 4

Print Page | Close Window

325-12 plow share? Model 4

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196606
Printed Date: 25 Sep 2024 at 1:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 325-12 plow share? Model 4

Posted By: 560Dennis
Subject: 325-12 plow share? Model 4
Date Posted: 10 Aug 2023 at 6:08pm

Got a 308880? AC share so far should ? Should be a 0 or a 3

12 inch shear

The mold board is 309210

Anyone how to get the missing number 0 or 3 , to rusty I can’t make it out today

Replies:

Posted By: 560Dennis
Date Posted: 10 Aug 2023 at 8:42pm

I found my issue, the Part number is 308880 for a #24-14 bottom . How 2 14 deep suck shares got on a 2-12 plow has me thinking I better get a piece of cherry pie and call it a night .

Posted By: Mikez
Date Posted: 10 Aug 2023 at 8:44pm

308880 is a good number. Says it’s a 14” fit #24 and #124 bottom

309210 is a good number. Says it’s a 12” moldboard fits #325

Posted By: Mikez
Date Posted: 10 Aug 2023 at 8:46pm

308800

308803

are 12” shares for 325 bottom

Posted By: 560Dennis
Date Posted: 12 Aug 2023 at 7:25pm

Plowing deeper into this , my weld frog assembled looks like the same design as that for a #24-12 . To rusty ,I can’t see any stamped numbers.

How it got 14 inch shares and a 325 moldboard is a mystery that I’ll never solve ,has to go back to previous owner before 1960 .

But no doubt ,it has a 14 inch share ,the numbers and parts list confirmed it.