Print Page | Close Window

2300 disc question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196603
Printed Date: 12 Nov 2024 at 10:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 2300 disc question
Posted By: GWS
Subject: 2300 disc question
Date Posted: 10 Aug 2023 at 12:28pm
Does anyone know whether a 13' 2300 disc will fit on a standard flatbed trailer if you pull the hitch off and swing the gangs in?

If not, it's over width and would cost a lot more for trucking. I have to think it would, or dealerships back in the day would have had to spend a fortune getting discs shipped in from the factory.

Thanks for any help.



Replies:
Posted By: 8070nc
Date Posted: 10 Aug 2023 at 12:37pm
They came to the dealer unassembled
We bought a 21 foot 2500 we got cheaper because we put it together

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor


Posted By: KJCHRIS
Date Posted: 10 Aug 2023 at 2:07pm
 Think it will stick out some even with hitch removed & gangs set in as far as possible. I had a 17.5' AC 2300 disc w/wings (about 12' folded) don't think it would tuck in to haul without a permit. But I do see discs w/wings folded up being hauled on semi's. usually have "oversize load" on front and rear.   
 I grew up in sight of 2 dealers in late 60's early 70's we'd see them unloading equipment from semi's in their lots in pieces or at the railyard 1/4 mile away and haul parts to their lots for assembly. IHC "M" w/loader and an Oliver w/loader about same size did the unloading. 
 I was a displaced farm kid, so always watched what went on at those places. 
 
 


-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,


Posted By: AC720Man
Date Posted: 10 Aug 2023 at 6:24pm
I hauled our 2300 20’ disc back from PA on my gooseneck. Hitch removed, gangs folded up, hitch removed. Hung over some on each side but I never got pulled over in the 4 hr drive.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: DougG
Date Posted: 10 Aug 2023 at 6:52pm
Farm equipment pulled by a Farmer,, if everything looks OK, they wont mess with you



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net