HD6G brakes adjustment
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196532
Printed Date: 23 Nov 2024 at 3:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6G brakes adjustment
Posted By: Jhilton69
Subject: HD6G brakes adjustment
Date Posted: 04 Aug 2023 at 7:55pm
| Hey yall spent 2 days going through all the topics and didn't see anything about the brake adjustment. The adjustment under the floorboard is maxed out. How do I get the the band adjustment in the rear housing? |
Replies:
Posted By: Coke-in-MN
Date Posted: 07 Aug 2023 at 2:26am
|
Under the seat area should be a domed cover on both rear cases , remove the cover (2 bolts) and band adjuster should be there . 3/4 hex nut , tighten that to bring band closer to drum . A few turns of it should tighten band ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Jhilton69
Date Posted: 08 Aug 2023 at 12:52pm
| Thank you |
Posted By: Coke-in-MN
Date Posted: 08 Aug 2023 at 7:52pm
|
The rear housing of the HD6 is the same as HD5 - so info on either will help
------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Jhilton69
Date Posted: 08 Aug 2023 at 9:09pm
| Thank yall |
Posted By: Jhilton69
Date Posted: 09 Aug 2023 at 5:43pm
 Well found the cap this is what it looks like. Apparently someone in the past tried to cut the bolts instead of taking thier time and doing it the wrong way. Started raining on me so I had to come inside. Anyone know a place I can get a new cap from this one has a hole in it. They did the same thing to the bolts on the other side as well. |
Posted By: Coke-in-MN
Date Posted: 10 Aug 2023 at 2:45pm
|
Don't think i saved those of rear housing I junked . Might try cutting a plastic bottle and covering them with it ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Jhilton69
Date Posted: 10 Aug 2023 at 4:19pm
| Last night while I was trying to sleep which doesn't happen often I was thinking I got an old cat out here and was thinking bout cutting the flat section of it and making 2 boxes to replace them with. Are there gaskets that go under them? |