Farm Equipment - Slow remotes

Print Page | Close Window

Slow remotes

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19644
Printed Date: 08 Feb 2025 at 9:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Slow remotes

Posted By: 7060
Subject: Slow remotes
Date Posted: 18 Oct 2010 at 9:59pm

My remotes seem really slow on my 7060. Its missing the dials under the seat to speed them up. My question is if I reach around in front of the remote blocks and turn the screw, can I turn it too far and does it go round and round or only a partial turn? It also makes a rattling sound when I use them, it sounds like its coming from under the cab on the right side. thanks

Replies:

Posted By: BobHnwO
Date Posted: 19 Oct 2010 at 4:30am

I think they go all the way around,my 7060 had the lever installed backwards,the rabbit is slow and the turtle is fast.

-------------
Why do today what you can put off til tomorrow.

Posted By: DrAllis
Date Posted: 19 Oct 2010 at 6:17am

They turn in a complete circle.......put the LONG side of the roll pin handle down to be fast or the long side up to be slow.

Posted By: skipwelte
Date Posted: 19 Oct 2010 at 1:23pm

the rattling sound can be the load checks bounceing in the valve. If it isnt real loud I wouldnt worry about it.

Posted By: Brad(WI)
Date Posted: 20 Oct 2010 at 6:09am

Check hydraulic fluid level, ours rattles when fluid is low.