Farm Equipment - allis chalmers 160 clutch

Print Page | Close Window

allis chalmers 160 clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196397
Printed Date: 12 Nov 2025 at 10:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis chalmers 160 clutch

Posted By: flem1951
Subject: allis chalmers 160 clutch
Date Posted: 29 Jul 2023 at 5:44pm

greetings,

I am looking for a clutch alignment tool for my 160. It 33 spines, 1 7/16 inside diameter.

anyone know where i can get one?

thx

Replies:

Posted By: AC720Man
Date Posted: 29 Jul 2023 at 7:44pm

My local machine shop turned one out of ABS plastic. Measurements are on the service manual. Make sure the flat side of the shims is facing outward or the clutch will not disengage.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD