allis plow shares
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19622
Printed Date: 08 Feb 2025 at 9:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis plow shares
Posted By: daveingreenbay
Subject: allis plow shares
Date Posted: 18 Oct 2010 at 5:42pm
| Anyone know of a source for plow points and cutting edges to rebuild worn plow shares? |
Replies:
Posted By: wkpoor
Date Posted: 18 Oct 2010 at 5:54pm
| Mine aren't worn yet but I too wondered if replacements could be had for the future. |
Posted By: MBwcenll
Date Posted: 18 Oct 2010 at 6:24pm
| I too was just about to check on this myself tonight. Replacement edges would work for me. |
Posted By: Gerald J.
Date Posted: 18 Oct 2010 at 6:26pm
|
First you have to know which plow bottom, then you can search for plow shares. Typically AC made anywhere from 3 to a dozen different shares for the same bottom, but the didn't work on other bottoms. To identify the bottom you need to find a part number on the frog, moldboard, shin, or share. Then those with plow bottom books can identify the bottom and provide part numbers for shares that will fit. Gerald J. |
Posted By: RSponenberg
Date Posted: 18 Oct 2010 at 7:31pm
|
Im looking for points ,shins and trash plates ( cover boards ) for a #387 in 16"....
Thanks Rob
|
Posted By: Gerald J.
Date Posted: 18 Oct 2010 at 7:49pm
|
Shoup www.shoupparts.com, probably Sloan Express, www.sloanex.com, Valu-Bilt, www.valubilt.com and others have shares, shins and trash boards for #387 bottom Gerald J. |
Posted By: Ray
Date Posted: 19 Oct 2010 at 7:42am
| I have several new and used shares,covers,moldboards ect. Not sure just what I have. 785-353-2392 |
Posted By: Butch(OH)
Date Posted: 19 Oct 2010 at 7:57am
|
As far as I know the only sources for the weld on edges and points for the older type shares is auctions and swap meets. We have cut edges from new throwaway type shares and welded them on and made up points from small excavator teeth. If you are looking for throwaway shares then you might be able to find them at the places Gerald suggested. We have in the past drilled new holes in frogs to accept a share that is available. The choices are narrow now, and get narrower every day it seems. |
Posted By: Gerald J.
Date Posted: 19 Oct 2010 at 9:56am
|
Ray, list the part numbers of those parts and we can identify the bottoms they fit. Gerald J. |
Posted By: Fred in Pa
Date Posted: 19 Oct 2010 at 9:59am
$ 3.oo each plus shipping I have 17 left. Send me a PM Frist come frist serve.Thanks
|
Posted By: Eldon (WA)
Date Posted: 19 Oct 2010 at 10:06am
|
There is a company out here that makes the hardened edges and points that you weld on...will try to find the info. Welding on hardened points for chisel plows is a big business out here in wheat country. ------------- ALLIS EXPRESS! This year: |
Posted By: Fred in Pa
Date Posted: 19 Oct 2010 at 10:19am
| 11 left . Thanks |
Posted By: Fred in Pa
Date Posted: 19 Oct 2010 at 12:26pm
| 6 left Thanks Fred |
Posted By: ALinIL
Date Posted: 19 Oct 2010 at 12:29pm
|
Dave and all - Here are some places to try. They list repair points, shares. shins, landslides, and moldboards. Hope this helps - AL http://www.ag1.net/catalog/700-8.html - http://www.ag1.net/catalog/700-8.html
http://www.osmundson.com/catalog/ - http://www.osmundson.com/catalog/
http://www.wiesecorp.com/plow-parts_p_-1,79.cfm - http://www.wiesecorp.com/plow-parts_p_-1,79.cfm
http://crescentforge.com/products/products_page.htm - http://crescentforge.com/products/products_page.htm
|
Posted By: MBwcenll
Date Posted: 19 Oct 2010 at 9:36pm
| Thank you, I did not have time to check your reply untill now. |
Posted By: daveingreenbay
Date Posted: 19 Oct 2010 at 10:22pm
| Thank you to everyone who responded. Your help is much appreciated |
Posted By: Fred in Pa
Date Posted: 20 Oct 2010 at 6:45am
| All my points are sold .Thanks Dave and other's . Fred |
Posted By: Ray
Date Posted: 20 Oct 2010 at 9:13am
|
Hi: In reply to Gerald J. 347749 New and Used: 71509806 new and used: 572184 new and used: No number but I think for 375 bottom new and used: Old style soft center lays,308802,308864,324890,they all say Allis Chalmers on,all used. All so plow bolts. May have other lays and plow parts. Thanks 785-353-2392 |
Posted By: Gerald J.
Date Posted: 20 Oct 2010 at 11:02am
|
First three not in my 1968 book which includes the #375 bottom. Wiese says 347749 and 572184 fit a #387 bottom. Nobody on line admits 71509806 even without the 71 modern prefix. 308802 fits 16" right hand 325 and 25 with bolted draw rod breacket and welded frog. Interestingly those two bottoms use the same frogs. 308864 fits a 14" right hand #24 bottom with bolted draw rod bracket and welded frog. Also fits #24 and 124 bottoms with welded draw rod bracket and welded frog. 324890 fits 16" #24 bottoms with welded or bolted draw rod bracket and welded frog. Gerald J. |