needed grease cap for 82S mower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196215
Printed Date: 12 Nov 2025 at 1:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: needed grease cap for 82S mower
Posted By: bill5308
Subject: needed grease cap for 82S mower
Date Posted: 18 Jul 2023 at 1:29pm
| I need to replace a grease cap my 82S mower. Can anyone point me in the right direction. I tried ebay. |
Replies:
Posted By: Macon Rounds
Date Posted: 18 Jul 2023 at 1:50pm
|
all the 80 and 82's should be the same. ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |
Posted By: Mikez
Date Posted: 18 Jul 2023 at 1:52pm
| Welcome to the forum. Which cap are you talking about |
Posted By: steve(ill)
Date Posted: 18 Jul 2023 at 1:55pm
most grease caps are a STANDARD size... like bolts... You measure the HOLE your trying to put the cap in, and order that size... You can GOOGLE a size to get the right one.
------------- Like them all, but love the "B"s. |
Posted By: Macon Rounds
Date Posted: 18 Jul 2023 at 2:30pm
|
82S is a Side mount mower. no wheels on those, so I assume it's the cap for twin Wheel drive.....  ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |
Posted By: AC720Man
Date Posted: 18 Jul 2023 at 2:35pm
|
I have a 82S and I don’t recall a grease cap on mine? I’m not close to it to take a look but if memory is correct there is a expansion plug on the end of the drive housing? Are you referring to it? Or are you referring to where you refill it with oil? Location would help and a picture would be even better. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Mikez
Date Posted: 18 Jul 2023 at 4:01pm
|
I meant the top outer ones 804505 or lower inner 804506. The top outer is still available through agco. The lower inner we have. If you don’t have a parts guy. We can probably help you on both
|
Posted By: orangereborn
Date Posted: 19 Jul 2023 at 9:21am
|
If it is the cast one pictured with the zerk, which it should be for the 82 series, I have them...$25...Thanks...Dale
964 192nd Ave New Richmond, WI 54017 715-247-3079 Cell 715-781-2055 Text |
Posted By: bill5308
Date Posted: 19 Jul 2023 at 12:34pm
|
can you give me a price on the rear outer bearing cover? bill casey bill5308@aol.com
|
Posted By: Mikez
Date Posted: 19 Jul 2023 at 8:37pm
|
What number you looking for
 |
Posted By: bill5308
Date Posted: 20 Jul 2023 at 9:28am
| part # 8 |
Posted By: steve(ill)
Date Posted: 20 Jul 2023 at 9:48am
------------- Like them all, but love the "B"s. |