Pulling Forum - Building a CA puller

Print Page | Close Window

Building a CA puller

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196159
Printed Date: 26 Nov 2024 at 4:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Building a CA puller

Posted By: Orange toe
Subject: Building a CA puller
Date Posted: 15 Jul 2023 at 11:32am

I was hoping someone could help me with the procedure of removing the hand clutch I have a parts tractor with left axle just not 100% clear on how to remove it

Replies:

Posted By: PaulB
Date Posted: 16 Jul 2023 at 8:19am

The service manuals give a detailed description of rebuilding the final drives, even the "butt first" I&T ones. Basically remove all the hand clutch parts and install the Left axle in the RH axle.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Orange toe
Date Posted: 21 Jul 2023 at 7:03pm

Thanks Paul

Posted By: Orange toe
Date Posted: 21 Jul 2023 at 7:22pm

I have a set of 16.9 x 28 firestones they are wore down to about a half inch tread just wondering with pretty much stock engine carb work , manifold work , would they be to much tire? the rules around our area are you are either farm stock or modified no real mile per hour rules except at a couple pulls