Farm Equipment - What AC Loaders fit a D17 Series III?

Print Page | Close Window

What AC Loaders fit a D17 Series III?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19610
Printed Date: 08 Feb 2025 at 7:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What AC Loaders fit a D17 Series III?

Posted By: irunjohndeere
Subject: What AC Loaders fit a D17 Series III?
Date Posted: 18 Oct 2010 at 11:35am

I have a AC D17 Series III and I need to know what loaders or series of loaders will fit it that have a front mounted hydraulic pump? I know were there is a AC 445 loader on a WD45 with a front mounted pump but I dont know if it will fit my D17 or not. Any help would be great...Thanks!

Replies:

Posted By: DrAllis
Date Posted: 18 Oct 2010 at 12:47pm

It can be/has been done.....some hole drilling required and the angle irons going to the rear axles need to be lengthened/changed. Front pump would require a driveshaft and mtg plate.

Posted By: DaveWisc.
Date Posted: 18 Oct 2010 at 1:34pm

I have the 400 series on my D17 series 3 mine is a 415 and when I bought it I had to buy the angle irons that went to the axels. I works great for me.

Posted By: Gary
Date Posted: 18 Oct 2010 at 4:36pm

Model 417 is for D-17, Series II, and Series III, needing front mounted pump and have hydraulic valve controls mounted on the loader frame.

Model 517 is for Series IV Tractor that has Live Hydraulic, and hydraulic double acting valves mounted on the tractor.

Gary

Posted By: irunjohndeere
Date Posted: 18 Oct 2010 at 6:38pm

Does anyone know where there is a Model 417 loader for sale?

Posted By: Dave (NE)
Date Posted: 18 Oct 2010 at 8:01pm

On the topic, does anyone have a Model 517 for a series IV for sale?

Posted By: Dave in il
Date Posted: 18 Oct 2010 at 9:44pm

I have a 500 loader with brackets for a D17 - 170 Came off my series IV D17, no welds or breaks. $2500