D19 gas governor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195959
Printed Date: 27 Jan 2025 at 8:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 gas governor
Posted By: orange-is-power
Subject: D19 gas governor
Date Posted: 01 Jul 2023 at 10:56am
Was removing the timing cover to replace the gasket and when it came off the governor came out also. My first question is do the gears need to be timed any certain way or can I just stick it back in there? My second question is I noticed one of the ball bearings is missing from the thrust bearing. Is it safe to keep using this one or would it be better to replace it? Hopefully they are still available if needed. Thanks.  
|
Replies:
Posted By: ryan(IN)
Date Posted: 01 Jul 2023 at 12:11pm
|
Shouldn’t need timed. I would replace that thrust bearing if I were you. ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: JC-WI
Date Posted: 01 Jul 2023 at 12:17pm
|
Look in the oil pan? probably not there, might have gone out in the oil change... might have fallen out when a mechanic had it apart before... or as it was being assembled. Don't know if it makes any difference for the slight out of balance. Guess I would replace it. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |