Farm Equipment - 8010 doesn't move

Print Page | Close Window

8010 doesn't move

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195651
Printed Date: 03 Sep 2025 at 2:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8010 doesn't move

Posted By: Dave in Oregon
Subject: 8010 doesn't move
Date Posted: 12 Jun 2023 at 10:23am

I parked the tractor as usual and 5 days later went to use it. As I pushed the clutch down to start it, it felt different, easier on the top end which was not usual. Tractor started fine but when I put it into gear, nothing happened.

Have hydraulics- power steering and 3-point work as usual

Took left panel off inside the cab and everything looked as usual

Swung the batteries out of the way (no fuel tank on right side) and blew dirt off the right side of the transmission

Linkage to there looks as though it works as it should

I do have the service and parts manuals

Where do I start? There are no good AC mechanics in this area.

Thanks for any help and assistance,

Dave

Replies:

Posted By: Lynn Marshall
Date Posted: 12 Jun 2023 at 11:00am

Power director??

Posted By: Dave in Oregon
Date Posted: 12 Jun 2023 at 1:38pm

Oops, forgot, it's a Power Shift

Posted By: 8070nc
Date Posted: 12 Jun 2023 at 1:52pm

I had a problem with steering linkage on one of the 8070s
Had to detach the clutch cable on the firewall to get at it
Forgot to tie the cable back to the bracket. Popped out and did the same thing
Just stopped moving all of a sudden but I rembered and had it fixed in 5 minutes

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor