Print Page | Close Window

37 wc transmission 49 wd clutch housing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195633
Printed Date: 20 Aug 2025 at 7:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 37 wc transmission 49 wd clutch housing
Posted By: HudCo
Subject: 37 wc transmission 49 wd clutch housing
Date Posted: 11 Jun 2023 at 9:29am
will i be able to use the wc trans with a wd bellhousing i have lots of wd parts and i need the housing with a starter hole i think 12.1 compression will be a little harder to hand crank



Replies:
Posted By: Kip-Utah
Date Posted: 11 Jun 2023 at 3:37pm
You can use the WD bellhousing. We used a WD45 bellhousing on a styled WC.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!


Posted By: HudCo
Date Posted: 11 Jun 2023 at 4:22pm
thanks i will start harvasting parts from our bone yard will probley use that 201 block also 


Posted By: HudCo
Date Posted: 11 Jun 2023 at 4:30pm
had a test and tune pull yesterday here sled was working well  because i ran the sled the full day but i did get one pull with my c at the end of the day against a allis b realy womped on it  but had just barely got it back from the other side  the 941 fords were eating the farmall m for lunch  



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net