Farm Equipment - What's that lever?

Print Page | Close Window

What's that lever?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195631
Printed Date: 15 Sep 2025 at 10:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What's that lever?

Posted By: GWS
Subject: What's that lever?
Date Posted: 11 Jun 2023 at 6:24am

I'm looking at getting another 190XT to run a NH bale wagon. I'm noticing the Series lll models have a small, paddle-like lever on the right side of the front console, under the grab handle and above the brakes.

I used to have an older (1965?) model and it didn't have that paddle lever.

What's that lever do?

Thanks, and I hope everyone is having a productive summer.

Replies:

Posted By: Tenn allis
Date Posted: 11 Jun 2023 at 6:48am

Brake lock I think is what your talking about

Posted By: DSeries4
Date Posted: 11 Jun 2023 at 6:24pm

Parking brake lever. All 190s have them, regardless of series.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: KJCHRIS
Date Posted: 11 Jun 2023 at 8:14pm

It's the lever to set/release park brake.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,

Posted By: rw
Date Posted: 11 Jun 2023 at 8:35pm

The pin that holds the handle on the shaft tends to break. Then the handle could fall off and be lost on some you are seeing?

Posted By: DrAllis
Date Posted: 12 Jun 2023 at 6:02am

Seen many with vise grips. Seen many more that the handle was welded to the shaft on the end. Don't know how anyone could get along without the brake pedal latch not working.