Farm Equipment - 7050 hydraulic issues

Print Page | Close Window

7050 hydraulic issues

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195435
Printed Date: 31 Oct 2025 at 5:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7050 hydraulic issues

Posted By: Wilczynskijr
Subject: 7050 hydraulic issues
Date Posted: 29 May 2023 at 9:37pm

Tractor has has issues sense I got it. Put new cables on it. It has hydraulic fluid. Everything works just remotes only work half the time. And most the time you.misy move lever around to find sweet spot and they are very slow and touchy. I've tried adjusting and seems like nothing changes.almost seem to surge for hydraulic fluid. Are my valves bad or is it the pumpm itslef?

Replies:

Posted By: DrAllis
Date Posted: 29 May 2023 at 9:56pm

How does the power steering work ??? What exactly have you been adjusting ??

Posted By: Wilczynskijr
Date Posted: 30 May 2023 at 10:38am

Power steering is not 100 percent.

Posted By: DrAllis
Date Posted: 30 May 2023 at 11:14am

Everything begins with the power steering pump. You've inherited the problem and have no idea when the hydraulic filters were serviced last. So, assuming the oil level is truly up into the TOP sight glass, I'd be changing the two hydraulic filters under the rear end. Make sure the left filter has the screen transferred from the old filter if it is even in there. If the screen is missing, that may well be your problem. Use only AGCO filters !!!! Get an owners manual, as changing those filters for the first time is a chore. Do NOT swap filter covers left to right. Right filter goes in spring first. Left filter goes screen in first. Until this area is 100% correct, you cannot diagnose what is going on with certainty.

Posted By: MACK
Date Posted: 30 May 2023 at 9:35pm

Sounds like you also have a lot of worn out linkage. MACK