8010 exhaust manifold
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195355
Printed Date: 25 Aug 2025 at 11:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8010 exhaust manifold
Posted By: eskinner
Subject: 8010 exhaust manifold
Date Posted: 24 May 2023 at 11:40am
| We thought we would probably be able to find someone on here to answer our questions better than anyone else. On the exhaust manifold we were trying to find what the tightening sequence is and also how many ft lbs. of torque to tighten too? Thanks! |
Replies:
Posted By: DrAllis
Date Posted: 24 May 2023 at 12:00pm
| The bolts are a special bolt from AGCO only. Do NOT use the lockwashers they use. Get a hardened Grade 8 flatwasher. 45 ft lbs with lubed threads. |
Posted By: IBWD MIke
Date Posted: 25 May 2023 at 8:17am
Doc, does that apply to all 301's or just the 8010?
|
DrAllis wrote:Posted By: DrAllis
Date Posted: 25 May 2023 at 8:26am
| ALL 301's have a special exhaust manifold bolt that has "self-locking" threads. The hard flat washer is my deal because I've seen too many broken lockwashers over the years and then that blows an exhaust gasket when the lockwasher has fallen out of place leaving the bolt loose. |
Posted By: IBWD MIke
Date Posted: 25 May 2023 at 8:41am
|
Thanks, now if I can just remember this if it ever comes up! |