6080 power beyond for a loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195302
Printed Date: 27 Apr 2024 at 5:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6080 power beyond for a loader
Posted By: farmerjohn827
Subject: 6080 power beyond for a loader
Date Posted: 22 May 2023 at 11:02am
| i have a 6080 allis chalmers with a loader the loader has two spools. how do i plumb the loader value spool in the tractor without using the rear remotes on tractor? i have a service manual it says that there is a power beyond hose but im not sure if that is where i tap into to get a hose up to loader value body |
Replies:
Posted By: Joe(TX)
Date Posted: 22 May 2023 at 12:16pm
|
I think the 6080 has a power beyond port on the pump end cap. I'm not sure what the connections would be. The flow from the end cap is usually for steering etc. an is usually low. Another method is to: Disconnect the line between the pump and the lift valve. Run a line between pump outlet line and the loader valve inlet. Run a line from the loader valve power beyond and the line going to the lift valve line. Run a line from the loader valve return and tee into the return line to the filter. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: farmerjohn827
Date Posted: 22 May 2023 at 7:52pm
| Well considering all the stuff I need to take off just to get to the hoses I think I'm just going leave it alone thank you for your input |
Posted By: calico190xt68
Date Posted: 22 May 2023 at 8:06pm
|
I added a joystick with grapple control on my 190xt so that I could run a hay grapple. It was worth all the trouble. I recommend you rethink the effort and do it. ------------- 80 7010 w/Cab, 67 190XTD Series I w/500 Loader, AC 2000 Plow, AC 4 row Planter, AC 77G Rake, Member Indiana A-C Partners, Member TAC |
Posted By: MACK
Date Posted: 22 May 2023 at 9:29pm
| The line coming out of remote valves goes to 3point which is power beyond. Unhook it and go to loader valve inlet, out of loader valve into 3point valve. MACK |
Posted By: farmerjohn827
Date Posted: 22 May 2023 at 9:47pm
| oh ok so all i have to do is take that hose off run a hose up loader value than back down to the hose i took off that sounds a whole lot easier than what i thouht i guess now all i have to do is start taking everything off the tractor to get to it thank you all for the help |
Posted By: farmerjohn827
Date Posted: 22 May 2023 at 10:01pm
| here is an sfter thought could i put pioneer coupler male female on like put a female coupler on the power beyond hose that i take off than make a hose that goes to tractor value put a male coupler on that end that way both are out from under tractor so you could un hook loader from tractor than rehook back to factory without braeking lines and getting oil all over i hope i said that right so you guys can follow me on this |
Posted By: MACK
Date Posted: 23 May 2023 at 8:52pm
| Should work, use new couplers. MACK |
Posted By: farmerjohn827
Date Posted: 23 May 2023 at 9:47pm
| Yep I got some stuff today for it just waiting for some free time to jump into |
Posted By: farmerjohn827
Date Posted: 27 May 2023 at 9:20pm
| Ok I plumbed in the loader to the power beyond and noticed that the three point goes down slowly but when I work the loader controls the three point goes down at normal speed is there something I might have done wrong? |
Posted By: MACK
Date Posted: 27 May 2023 at 9:53pm
| Did 3pt have a load or just empty arms? can not think of a reason. MACK |
Posted By: farmerjohn827
Date Posted: 27 May 2023 at 10:05pm
| No load just the arms |
Posted By: MACK
Date Posted: 28 May 2023 at 7:34pm
| That could be normal. MACK |
Posted By: WF owner
Date Posted: 29 May 2023 at 5:49am
Possibly the pressure in the system is slightly slowing the return of the fluid from the three point valve?
|
farmerjohn827 wrote: