filter Microns
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195042
Printed Date: 03 Sep 2025 at 2:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: filter Microns
Posted By: Acdiesel
Subject: filter Microns
Date Posted: 08 May 2023 at 8:32pm
|
Can anybody tell what the Micron rating is on the Agco 70267600 hydraluic filter is? Thanks, Dan ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Replies:
Posted By: steve(ill)
Date Posted: 08 May 2023 at 9:16pm
|
it cross references to a WIX 51830 which is a 25 micron........ most tractor hydraulic filters are 20 or 25 micron. ------------- Like them all, but love the "B"s. |
Posted By: PaulB
Date Posted: 09 May 2023 at 6:35am
That assuming that the WIX filter is of the same micron rating as the AGCO one. After the fiasco of the WIX filters for the older AC bypass filters a few years ago. I'd never use a WIX or NAPA filter on anything. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
steve(ill) wrote:Posted By: ac45dave
Date Posted: 09 May 2023 at 7:12am
|
Your Agco dealer can get the specs, GPM, Microns etc.At least my dealer has for me in the past. ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: KatrinaBrown
Date Posted: 12 Jun 2023 at 8:33am
| Thanks for the advice, For a very long time, I was curious about this as well. However, today, I lost a bet with a friend over an essay that he won with full marks. you can also https://www.topessaywriting.org/samples/personality" rel="nofollow - visit this page , I did lose the bet because of this magnificent essay, but you can get essays on any topic and always succeed. |
Posted By: ryan(IN)
Date Posted: 12 Jun 2023 at 11:50am
There was no book that I knew of to show me filter specs when I was a dealer. A dealer could probably put a case into Agco and they may tell them. But no filter reference that I ever recalled having access to showed microns and such. ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |