Farm Equipment - 7010 power shift noise

Print Page | Close Window

7010 power shift noise

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194943
Printed Date: 23 Aug 2025 at 8:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7010 power shift noise

Posted By: allis/cattle
Subject: 7010 power shift noise
Date Posted: 02 May 2023 at 2:44pm

My 7010 power shift has a clunking noise in 3,4,5, and 6th gear. It was running fine till about an hour ago when I throttled back for a rough bridge crossing. I had throttled up and it started clunking. I stopped turned around and am now idling home in second gear as it don’t make noise in that gear

Replies:

Posted By: DrAllis
Date Posted: 02 May 2023 at 2:51pm

Place the tractor in PARK. Foot off the inching pedal. Shift progressively 1 thru 6, pausing at each gear to listen to it. Start with engine at 1200 RPM and if it seems quiet throttle on up to full speed. I'm not there, but I'm thinking a cab ground out/cab rubber isolator issue, not a transmission issue.

Posted By: allis/cattle
Date Posted: 02 May 2023 at 2:53pm

It’s not a steady clunk it speeds up with the gear your in

Posted By: DrAllis
Date Posted: 02 May 2023 at 3:54pm

Did you do what I told you to do ?????

Posted By: allis/cattle
Date Posted: 02 May 2023 at 4:05pm

Yes

Posted By: DrAllis
Date Posted: 02 May 2023 at 5:18pm

So, if it still makes the noise sitting still in PARK (engine running), while running it thru the 1 thru 6 gears, it sounds like a transmission problem. But, I'm not there listening to it. Maybe drain the transmission oil and clean the pump screen and see what might be laying next to the screen.