Garden Tractors - 32 " rear tiller bearing removal

Print Page | Close Window

32 " rear tiller bearing removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194898
Printed Date: 12 May 2024 at 2:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 32 " rear tiller bearing removal

Posted By: thatsmyallis
Subject: 32 " rear tiller bearing removal
Date Posted: 30 Apr 2023 at 10:40am

i am trying to to get to chain drive gear in rear tiller . i am having trouble removing bearings to get case apart. i have removed flange . from looking at online parts blowup there seems to be a washer called a shield that needs to come off before bearing. there is a ridge on shaft on top of bearing . im wondering if this is it and it is just stuck. when i took the case apart th chain was off. i put it back on reassembled and tried to use it. it would slip going foward. when i looked at drive gear the teeth were slanted . i assume they should be straight and it is wore out. any help would be appreciated as i wanted to try it on garden this year . thanks

Replies:

Posted By: HudCo
Date Posted: 30 Apr 2023 at 10:19pm

the guys over on the simpleAc forum will know and probley know where you can get the parts

Posted By: thatsmyallis
Date Posted: 04 May 2023 at 4:10pm

thanks for your help im trying but having trouble joining group

Posted By: HudCo
Date Posted: 04 May 2023 at 10:58pm

i did the chain and bearings on mine about 6 or 7 years ago it didnot seem to be very hard just messey i am going to put mine on in a few days and iwill look to see if i can remeber how it came apart

Posted By: thatsmyallis
Date Posted: 07 May 2023 at 8:10pm

thanks