720 tiller
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194697
Printed Date: 23 Nov 2024 at 12:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 tiller
Posted By: Lynn Marshall
Subject: 720 tiller
Date Posted: 18 Apr 2023 at 6:30pm
| I recently purchased a 720 tractor and mower. It has a three point hitch and both front and rear PTO. Is the simplicity tiller the only one that with work on that machine? I'm beginning to think so ,because of the PTO speed and odd female spline setup. Any knowledge is welcome and are they available? |
Replies:
Posted By: Dusty MI
Date Posted: 18 Apr 2023 at 6:59pm
|
I have a 36" 3 point rototiller with a gas engine with recoil start, that I don't use. ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: AC720Man
Date Posted: 20 Apr 2023 at 5:06pm
|
The 48” Allis or Simplicity version is the only one that is designed for it. 1,000 rpm pto and only accepts the small spline drive shaft. And they are sometimes difficult to come by. I looked for 6 years until I stumbled across one. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Brad in WA
Date Posted: 20 Apr 2023 at 10:04pm
| Robbie, it's actually 2000 RPM. |
Posted By: AC720Man
Date Posted: 21 Apr 2023 at 3:15pm
|
Your correct Brad, I had the 1,000 rpm pto thread on my mind about the 7095. Thanks for correcting me. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Bird76Mojo
Date Posted: 27 Apr 2023 at 4:30pm
| I have an absolute tank of a Montgomery Wards/Sears tiller for mine but I've never seen another, as well as an Allis version. The Cub Cadets also had a 2000rpm pto input speed 3pt tiller. As well as the john Deere's. |
Posted By: Lynn Marshall
Date Posted: 29 Apr 2023 at 12:29pm
| Yes, I was told that the 420 and 430 John Deere used that pto system. Do you know what IH tractor models would use that setup? Or even the number of the IH tiller? |
Posted By: Bird76Mojo
Date Posted: 30 Apr 2023 at 5:10am
| No I do not. Sorry. |
Posted By: IBWD MIke
Date Posted: 30 Apr 2023 at 5:18am
|
982 Cub Cadet, not sure on the tiller model no. Some of the later super garden's may have used the same tiller. |
Posted By: injpumpEd
Date Posted: 04 May 2023 at 12:49pm
It's 2000 rpm, but they also turn the opposite direction the std 540/1000 turn. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Brad in WA wrote: