Farm Equipment - Allis Rake Parts

Allis Rake Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194579
Printed Date: 13 Nov 2025 at 2:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Rake Parts

Posted By: DanielW
Subject: Allis Rake Parts
Date Posted: 12 Apr 2023 at 12:14pm

How do,

I'm wondering if anyone happens to have any parts available for the old Allis PTO side delivery rakes - the ones that can be reversed for tedding (either the #7, or it's predecessor which I think was just called the 'PTO Side Delivery rake').

In particular, I'm looking for some of the reel bearings. I can actually source the inner cylindrical roller bearing from Berliss if I have to. It's the casting that the inner bearings press into (and the 'U' straps that hold them in place) that I need.

I might also be interested in some teeth and holders if anyone has some; I can get new aftermarket teeth, but at $13 each they seem pretty dear compared to other rake teeth.

Replies:

Posted By: Joe Goodwill
Date Posted: 12 Apr 2023 at 3:43pm

Where are you sourcing the aftermarket teeth? I need some.
Thanks

Posted By: TomC
Date Posted: 12 Apr 2023 at 5:00pm

Try this guy, I restored a model 77 rake, I needed a lot of parts, he's very knowledgeable,has a lot of salvage parts,very helpful,I do not remember his name but I do have his number 641-572-0194,

Posted By: DanielW
Date Posted: 12 Apr 2023 at 6:40pm

AI has aftermarket teeth (any dealer can order from AI). Their part number A-70511506. Other companies have the same teeth. Up here the cheapest ones are from Canada Farm Supply. Online places like Sloan and Herschel also sell the same tooth - part number 511506. If you Google that part number you'll find them.

Posted By: Joe Goodwill
Date Posted: 12 Apr 2023 at 6:47pm

Thanks

Posted By: 200Tom1
Date Posted: 12 Apr 2023 at 8:47pm

I have a few rake teeth. You can have them for the cost of shipping. I will check and see how many I have. They are rusty. Send me your zip code so I can have the post office figure shipping.

Posted By: orangereborn
Date Posted: 13 Apr 2023 at 12:33am

I can help out with the parts if the above run short...Thanks...Dale

Posted By: dr p
Date Posted: 13 Apr 2023 at 6:14am

How many bearing holders do you need? I can spare some

Posted By: DanielW
Date Posted: 13 Apr 2023 at 6:48am

Thanks! I'm actually in Canada - Southern Ontario. Postal Code L1A 3M1. If shipping is reasonable I'm happy to pay for them. The problem up here is all the cross-border nonsense.

Posted By: DanielW
Date Posted: 13 Apr 2023 at 6:59am

I need 2 bearing holders. I appreciate the offer, though I don't want to take anyone's spare parts if they're still running one of these rakes. I may draw some of them up in CAD and see how much my machine shop wants to make a couple.

Posted By: dr p
Date Posted: 13 Apr 2023 at 7:48pm

I'll send you two. If you get a couple milled , send me a couple

Posted By: dr p
Date Posted: 13 Apr 2023 at 7:51pm

Pm your address. Somehow i ended up president of the Canadian dental study club even though i practice in new york but i have to cross the border a lot for that. i can ship them from your side.