Allis 7030
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194231
Printed Date: 13 May 2025 at 10:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis 7030
Posted By: captaindana
Subject: Allis 7030
Date Posted: 24 Mar 2023 at 7:17am
Can I tap a wire off the 12v wire going to that oil press sending unit to power my Hobbs meter without screwing up any oil press indications? It’s what I need for the key on/off to run Hobbs. For sure I’m not the electrician😆😁. Thanks to all, Dana
-------------
Blue Skies and Tail Winds
Dana
|
Replies:
Posted By: tbran
Date Posted: 24 Mar 2023 at 7:59am
I think the wire going to the OEM pressure sender is not 12V. IT is either grounded or not to on/off the light.
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: captaindana
Date Posted: 24 Mar 2023 at 10:40am
Ok Shucks. I do not want to open the panel and I am having a heckuva time finding a 12 V source that follows the key position.
-------------
Blue Skies and Tail Winds
Dana
|
Posted By: farmboy520
Date Posted: 24 Mar 2023 at 3:46pm
Couldn't you just go off the key switch? The bottom of the console comes off and it would be easier to get too than some other places.
-------------
On the farm: Agco Allis 9695, 7060, 7010, R66, Farmall H, and Farmall F20 (Great Grandpa's)
|
Posted By: captaindana
Date Posted: 24 Mar 2023 at 5:40pm
Yeah farmboy I could have but didn't. And thanks Tim I had forgotten that! I have a 12v wire with an inline fuse coming to a neat switch on the right side of the instrument panel, then out to the Hobbs and usb charger. When the tractor is started and shut down this switch must follow. Oh well all 4 muscle tractors now have new Hobbs. Cheers and safe days ahead y’all. Dana
-------------
Blue Skies and Tail Winds
Dana
|
|