Farm Equipment - WD 45 wiring

Print Page | Close Window

WD 45 wiring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19391
Printed Date: 08 Feb 2025 at 3:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD 45 wiring

Posted By: Rod in MN
Subject: WD 45 wiring
Date Posted: 12 Oct 2010 at 8:46pm

HI Guy's I have a WD45 that i'm switching over to 12volts Genny and a 12 volt reg.It has a pull rod for the starter installed a new key switch . Bur want to use the old light switch the bulbs are changed over to 12 volt . would it be easer ti get a cutout and switch over to 12volt . It has a distriutor on it Do's sone one have a wiring diagram for this .

Thank You Very Much

Rod in MN

Replies:

Posted By: DSeries4
Date Posted: 12 Oct 2010 at 9:57pm

You will need a 12 volt coil and condensor. Lights should be ok if you already put 12V bulbs in. Should not have to make any changes to the wiring after this.

Posted By: KC-WD45
Date Posted: 13 Oct 2010 at 9:56am

I use a resistor to the coil. Starter shure spins with 12v.

Posted By: Rod in MN
Date Posted: 13 Oct 2010 at 10:23am

Hi Guy's yes the coil and points were all changed over to 12volts.just need wiring diagrame

Thank You

Rod in MN

Posted By: Matt MN
Date Posted: 13 Oct 2010 at 12:46pm

Here are the wiring diagrams I like to use. they work out pretty well

http://dueyschutter.freeservers.com/photo3.html - wiring diagram

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Steve in NJ
Date Posted: 15 Oct 2010 at 6:58am

We can fix ya up with a complete 12V conversion kit if interested. I give you everything in the kit to do a pro wiring job except ambition. That you have to supply. LOL! Drop us a line, be happy to help you out.....

mailto:Steve@B&B - Steve@B&B