Farm Equipment - d17 fenders

Print Page | Close Window

d17 fenders

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19383
Printed Date: 08 Feb 2025 at 12:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d17 fenders

Posted By: vyvyjim
Subject: d17 fenders
Date Posted: 12 Oct 2010 at 6:10pm

This is my first restoration project, a D17 series IV. The fenders are bad. I've seen some on the internet from Allstates, Restoration supply and Steiner but they look crude and cheap. What do you suggest?

Replies:

Posted By: Matt MN
Date Posted: 12 Oct 2010 at 8:22pm

best would be to cut out the bad areas and weld in patch panels or find another factory set

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Jeff Z. NY
Date Posted: 12 Oct 2010 at 8:41pm

Don't waste your money on those aftermarket ones. They are pretty bad.
A nice used set will cost you but you will be better off. Keep an eye on ebay.

Posted By: Henry se/k!
Date Posted: 12 Oct 2010 at 9:04pm

I have a set that have been rebuilt. AS good or better than when new. Primed and ready to paint. 425.00 plus ride 620 439 5638

Posted By: EricTn
Date Posted: 12 Oct 2010 at 9:05pm

Are the series IV fenders any different from other series other than mounting holes for lights and grab handles? Maybe some holes for the hyd control valve setup. Just thinking one could drill a few holes if that is the only difference. Thanks, Eric

Posted By: DSeries4
Date Posted: 12 Oct 2010 at 9:52pm

Series IV fenders are the same as all other D17s (same as D15 too and maybe D17). The only difference is the holes for the headlights/grab handle. Hydraulic valve control does not matter.